![]() |
![]() |
|
Paint and Body Materials, Techniques, and How To's |
![]() |
|
Share | Thread Tools | Search this Thread |
![]() |
#1 | ||||||
Charter Member
![]()
Join Date: Oct 2009
Location: Palm Harbor, FL
Posts: 171
Thanks: 11
Thanked 32 Times in 19 Posts
Gameroom Barn Bucks: $1311
|
![]()
I am thinging of buying an ACI front splitter. My question is what is a ballpark figure to get it painted? I was thinking of a matte black.
|
||||||
![]() |
![]() |
![]() |
#2 | ||||||
Administrator
Barn Stall Owner #7 Barn Raising I,II,IV NCM Supporter '13,'14 ![]()
Join Date: Oct 2009
Location: Pewaukee,WI
Posts: 8,222
Thanks: 1,044
Thanked 5,048 Times in 2,243 Posts
Gameroom Barn Bucks: $30682687
|
![]()
I'd have to dig up the receipt, but I think I paid around $150 to have it prepped/painted (Millennium Yellow).
I did the initial fitting and installation on the car before taking it to the shop to get painted, so after it was painted, it was just a matter of bolting it back on the car. If you would have the shop also install it on the car, figure another couple hours in labor time for that. ![]() |
||||||
![]() |
![]() |
![]() |
#3 | ||||||
Charter Member - C5 Mod
Barn Stall Owner #41 ![]()
Join Date: Oct 2009
Location: hagerstown, md
Posts: 5,780
Thanks: 1,206
Thanked 1,291 Times in 827 Posts
Gameroom Barn Bucks: $8192878
|
![]() ![]() ![]() I painted mine myself with, GASP, a can! ![]() Duplicolor has a perfect match for pewter. ![]() Painting is pretty much all in the prep work. I cleaned the piece with mineral spirits, sanded with 320, then 600 grit, 3 coats of self leveling primer, 4 coats of color, then about 7 coats of clear. Then I let it dry for 48 hours, wetsanded it with 1000 & 2000 grit, then polished it out. The hardest part was the polishing. I did it by hand. Worst thing about it was, I had to do it all, plus glass work, over again less than two weeks later, after the wife decided she wanted to hit a parking curb! ![]() ![]() Matte black would be a snap to do. No wetsanding or polishing! Done and on the car in a couple hours. ![]()
__________________
'98 Pewter coupe. A little of this and a little of that..... ![]() |
||||||
![]() |
![]() |
![]() |
#4 | ||||||
Charter Member
![]()
Join Date: Oct 2009
Location: Palm Harbor, FL
Posts: 171
Thanks: 11
Thanked 32 Times in 19 Posts
Gameroom Barn Bucks: $1311
|
![]()
Thanks to both of you. I was planning on installing it myself.
|
||||||
![]() |
![]() |
![]() |
#5 | ||||||
Charter Member - C5 Mod
Barn Stall Owner #41 ![]()
Join Date: Oct 2009
Location: hagerstown, md
Posts: 5,780
Thanks: 1,206
Thanked 1,291 Times in 827 Posts
Gameroom Barn Bucks: $8192878
|
![]()
Putting it on is a beoch! You're basically working blind when installing the support braces under the front facia. Took me about 3 hours. It's nothing that tedious, just have to take your time.
If you have any questions, or need some advice, PM me and I'll give you my cell #. ![]()
__________________
'98 Pewter coupe. A little of this and a little of that..... ![]() |
||||||
![]() |
![]() |
![]() |
#6 | ||||||
Charter Member
![]()
Join Date: Oct 2009
Location: Palm Harbor, FL
Posts: 171
Thanks: 11
Thanked 32 Times in 19 Posts
Gameroom Barn Bucks: $1311
|
![]()
Thanks I will keep that in mind when I get mine.
|
||||||
![]() |
![]() |
![]() |
#7 | ||||||
Vette Barn nOOb
Join Date: Dec 2010
Location: OCONUS
Posts: 9
Thanks: 2
Thanked 0 Times in 0 Posts
Gameroom Barn Bucks: $570
|
![]() |
||||||
![]() |
![]() |
![]() |
#8 | |||||||
Barn Stall Owner #2558
NCM Supporter '12,'13,'14,'15,'17 ![]()
Join Date: Jan 2011
Location: Best county in Ga.
Posts: 22,406
Thanks: 6,581
Thanked 2,587 Times in 1,762 Posts
Gameroom Barn Bucks: $6573152
|
![]() Quote:
|
|||||||
![]() |
![]() |
![]() |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||