|
C4 Open Discussion General and technical C4 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
|
Share | Thread Tools | Search this Thread |
04-26-2012, 3:25pm | #1 | ||||||
A Real Barner
Join Date: Feb 2011
Location: South Carolina
Posts: 3,901
Thanks: 1,187
Thanked 1,565 Times in 816 Posts
Gameroom Barn Bucks: $3694
|
93 C4 rear clunk noise over bumps?
My 93 is making a clunk at slow speeds over bumps. The rear has new hubs, leaf srpings, spring eye bushings, shocks are qa1's about 3 years old. What else can clunk back there, before I get into it this evening.
|
||||||
06-12-2012, 9:00am | #2 | ||||||
Vette Barn nOOb
Join Date: Mar 2012
Location: Redlands, Ca
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Gameroom Barn Bucks: $505
|
I also have a "clunk". I think mine is the rear hatch. I do know the weather stripping needs replaced.
Last edited by kendawg; 06-12-2012 at 9:02am. Reason: missed lettsrs in words due to useing droid :( |
||||||
06-16-2012, 6:03pm | #3 | ||||||
A Real Barner
Join Date: Jan 2011
Location: San Marcos, Ca
Posts: 1,959
Thanks: 184
Thanked 279 Times in 194 Posts
Gameroom Barn Bucks: $2013824
|
Besides all of the bushing and tie rod links- you can have some diff side bearing play on the driver side, but I don't think that usually makes much noise.
I'd look at the shocks again. could have loosened up at the top. |
||||||
06-16-2012, 6:18pm | #4 | ||||||
A Real Barner
Join Date: Feb 2011
Location: South Carolina
Posts: 3,901
Thanks: 1,187
Thanked 1,565 Times in 816 Posts
Gameroom Barn Bucks: $3694
|
I retorqued shocks, wheel bearing spine nut, dog bones etc. I even verfied spare tire carrier was tight. I may be getting old, but it sounds like a tire when you take it off and it slams to the ground on the flat side/tread. Noises are hard to describe.the supension is all pretty new.very few miles, due to Hawaii and deployments...
|
||||||
06-21-2012, 4:22pm | #5 | ||||||
Vette Barn Crew
Join Date: Jun 2012
Posts: 123
Thanks: 40
Thanked 55 Times in 25 Posts
Gameroom Barn Bucks: $5000410
|
Exhuast ??? Are the nuts on the muffler hanger at the rear loose?
|
||||||
06-21-2012, 4:29pm | #6 | ||||||
A Real Barner
Join Date: Feb 2011
Location: South Carolina
Posts: 3,901
Thanks: 1,187
Thanked 1,565 Times in 816 Posts
Gameroom Barn Bucks: $3694
|
|
||||||
06-29-2012, 9:34pm | #7 | ||||||
Vette Barn Crew
Join Date: Jun 2012
Posts: 123
Thanks: 40
Thanked 55 Times in 25 Posts
Gameroom Barn Bucks: $5000410
|
Find the culprit yet?
|
||||||
06-29-2012, 9:39pm | #8 | ||||||
A Real Barner
Join Date: Feb 2011
Location: South Carolina
Posts: 3,901
Thanks: 1,187
Thanked 1,565 Times in 816 Posts
Gameroom Barn Bucks: $3694
|
Nope. exhaust is tight. I think it is the half shaft. I remember when I did the u joint that it had a slight noise to it I could make when it was off the car. From what I know it is a cardboard type material in there, for noise suppression. I have no idea what is in there, but it was loose. Now with the weight of the car, it magnifies it. Thoughts?
|
||||||
08-18-2012, 10:16pm | #9 | ||||||
A Real Barner
Join Date: Feb 2011
Location: South Carolina
Posts: 3,901
Thanks: 1,187
Thanked 1,565 Times in 816 Posts
Gameroom Barn Bucks: $3694
|
Update. Found the problem. I have QA1 adjustable shocks with ZO7 springs. I had the rear shocks set on very soft, 2 clicks. Apparently it doesn't work with the spring. When I bumped it up to 5 clicks, noise went away.. So, a 5 is matched somewhat with the year spring. Too low, and it doesn't work and do its job of dampening..
|
||||||
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||