|
Off Topic Off Topic - General non-Corvette related discussion. |
|
Share | Thread Tools | Search this Thread |
07-27-2021, 2:33pm | #1 | ||||||
Chief Electrician
Barn Stall Owner #7734 Bantayan Kids '15
Join Date: Jan 2011
Location: The corner of Cease Rd. and Desist St.
Posts: 45,210
Thanks: 17,373
Thanked 34,198 Times in 13,864 Posts
Gameroom Barn Bucks: $107478
|
AC Repair...wish me luck
Yeah, I called "the guy" and apparently he wants me to finance his summer vacation trip. $2500.00 to install an evaporator coil that I can buy for $320.00.
So I will BE the guy on this one. I'm going to DIY it. Shut the high side off at the condenser, run the pump a SHORT time and shut the low side off. De-solder the coil and slide it out (goes in like a drawer). Slide the new one in and attach. Draw vacuum on the coil and lines and make sure there are no leaks, and then open the condenser back up. What could go wrong? I have literally NOTHING to lose if it works. If it doesn't, I only need to evacuate and refill assuming no leak. |
||||||
07-27-2021, 2:39pm | #2 | ||||||
Chief Meat Gazer
Charter Member Barn Stall Owner #98 Barn Raising II,III,IV
Join Date: Oct 2009
Location: Ohio
Posts: 51,299
Thanks: 23,669
Thanked 33,962 Times in 12,375 Posts
Gameroom Barn Bucks: $5135124
|
|
||||||
The Following 6 Users Say Thank You to Mike Mercury For This Useful Post: |
07-27-2021, 3:03pm | #3 | ||||||
A Real Barner
Join Date: Apr 2019
Location: North Carolina
Posts: 17,444
Thanks: 4,971
Thanked 24,029 Times in 9,999 Posts
Gameroom Barn Bucks: $315482
|
More power to you man... It's not brain surgery anyway.
|
||||||
07-27-2021, 3:04pm | #4 | ||||||
A Real Barner
Join Date: Mar 2019
Posts: 5,781
Thanks: 307
Thanked 11,339 Times in 4,045 Posts
Gameroom Barn Bucks: $29012
|
Anything good to sell?
|
||||||
The Following 4 Users Say Thank You to Murray For This Useful Post: |
07-27-2021, 3:13pm | #5 | ||||||
Chief Electrician
Barn Stall Owner #7734 Bantayan Kids '15
Join Date: Jan 2011
Location: The corner of Cease Rd. and Desist St.
Posts: 45,210
Thanks: 17,373
Thanked 34,198 Times in 13,864 Posts
Gameroom Barn Bucks: $107478
|
|
||||||
07-27-2021, 3:56pm | #6 | ||||||
Barn Stall Owner #122
NCM Supporter '11,'13 Bantayan Kids '13,'14,'17
Join Date: Oct 2009
Location: Gaithersburg, MD.
Posts: 22,644
Thanks: 6,244
Thanked 8,447 Times in 4,268 Posts
Gameroom Barn Bucks: $1158963
|
You are paying $2000 for his knowledge and warranty. So you screw it up, it will be $3000 to fix it.
|
||||||
07-27-2021, 4:11pm | #7 | ||||||
Sparkles Flambeaux
Barn Stall Owner #4 Barn Raising I,II NCM Supporter '13,'14,'15,'16,'17,'21 Bantayan Kids '13,'14,'15,'17
Join Date: Jan 2011
Location: Santa Fe, NM
Posts: 61,551
Thanks: 11,809
Thanked 33,172 Times in 14,202 Posts
Gameroom Barn Bucks: $17500122
|
new AC unit coming up in 3, 2, 1.....
|
||||||
The Following User Says Thank You to DAB For This Useful Post: |
07-27-2021, 4:40pm | #8 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 83,750
Thanks: 38,284
Thanked 42,216 Times in 17,579 Posts
Gameroom Barn Bucks: $2621492
|
Jeff,
Buena suerte! Also, via con Dios, although I hope this one is not necessary. Having said that, if the A coil is leaking, then you'll have to add refrigerant, too. I'm guessing you determined there was a problem when the AC failed to cool properly? I had one of my A coils replaced maybe 8 or 9 years back. You could see the oil spot where the coolant oil was leaking. I was told it had to be replaced, but I always wondered why it couldn't be fixed. A little brazing? |
||||||
07-27-2021, 4:58pm | #9 | |||||||
A Real Barner
Join Date: Apr 2019
Location: North Carolina
Posts: 17,444
Thanks: 4,971
Thanked 24,029 Times in 9,999 Posts
Gameroom Barn Bucks: $315482
|
Quote:
|
|||||||
The Following 5 Users Say Thank You to Rodnok1 For This Useful Post: |
07-27-2021, 5:46pm | #10 | ||||||
Barn Stall Owner #THX1138
Join Date: May 2011
Location: South of San Antonio
Posts: 2,841
Thanks: 1,061
Thanked 2,212 Times in 1,000 Posts
Gameroom Barn Bucks: $1322
|
Compressor went out on my unit early last year, I wasn't paying the stupid tax either. Bought a set of digital gauges, a vacuum pump, and a new 2.5t condenser for $1k. Put that bitch in and been rocking the cool ever since. Commercial can be pretty complex, but just how hard is a residential unit. I can replace the damned thing every 5 years and still come out ahead.
|
||||||
07-27-2021, 6:03pm | #11 | ||||||
A Real Barner
Join Date: Feb 2012
Posts: 8,046
Thanks: 196
Thanked 4,454 Times in 2,447 Posts
Gameroom Barn Bucks: $15637580
|
Might be cheaper to relocate to Michigan where people only use AC to annoy the neighbors.
|
||||||
The Following 3 Users Say Thank You to Torqaholic For This Useful Post: |
07-27-2021, 6:06pm | #12 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 83,750
Thanks: 38,284
Thanked 42,216 Times in 17,579 Posts
Gameroom Barn Bucks: $2621492
|
|
||||||
The Following User Says Thank You to Bill For This Useful Post: |
07-27-2021, 6:08pm | #13 | ||||||
Barn Stall Owner #74
Barn Raising II Bantayan Kids '13,'17
Join Date: Jan 2011
Location: On an island somewhere
Posts: 23,708
Thanks: 3,840
Thanked 14,925 Times in 6,585 Posts
Gameroom Barn Bucks: $10393746
|
Please video this procedure
|
||||||
07-27-2021, 6:33pm | #14 | ||||||
Sparkles Flambeaux
Barn Stall Owner #4 Barn Raising I,II NCM Supporter '13,'14,'15,'16,'17,'21 Bantayan Kids '13,'14,'15,'17
Join Date: Jan 2011
Location: Santa Fe, NM
Posts: 61,551
Thanks: 11,809
Thanked 33,172 Times in 14,202 Posts
Gameroom Barn Bucks: $17500122
|
only my truck has AC. none in the house.
|
||||||
07-27-2021, 6:54pm | #15 | ||||||
Barn Stall Owner #113
Bantayan Kids '14
Join Date: Apr 2010
Location: Here to make friends
Posts: 86,777
Thanks: 74,779
Thanked 17,406 Times in 7,131 Posts
Gameroom Barn Bucks: $306898
|
After seeing what you can do with wire, I'm sure you'll get this fixed in no time
|
||||||
The Following 4 Users Say Thank You to The_Dude For This Useful Post: |
07-27-2021, 6:56pm | #16 | ||||||
VB Dad of the Year
RDBM Barn Stall Owner #9 Barn Raising I,II NCM Supporter '11,'12,'13,'14,'15,'16,'17,'19,'20,'21 Bantayan Kids '13,'14,'15,'17 GTMS ‘18
Join Date: Jan 2011
Location: Fort Myers
Posts: 36,935
Thanks: 10,385
Thanked 21,348 Times in 8,417 Posts
Gameroom Barn Bucks: $35999378
|
|
||||||
07-27-2021, 7:01pm | #17 | ||||||
2020 Election Expert
Join Date: Sep 2011
Location: Big Sky Country... Where the men are men, the sheep are nervous, and the winters are LOOONG!!!
Posts: 32,702
Thanks: 22,525
Thanked 19,810 Times in 7,383 Posts
Gameroom Barn Bucks: $1134156
|
Call the guy
/thread |
||||||
07-27-2021, 7:13pm | #18 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 83,750
Thanks: 38,284
Thanked 42,216 Times in 17,579 Posts
Gameroom Barn Bucks: $2621492
|
The guy that did mine years ago used the compressor itself to suck the remaining freon from the system into the compressor, and to hold it in the compressor. He R&R'ed the A coil, added freon, and voila, cold air again. I thought he'd have to have a separate canister and equipment to pull a vacuum to recover and hold the freon, but no......
|
||||||
07-27-2021, 8:06pm | #19 | ||||||
Barn Stall Owner #327
NCM Supporter '16,'17,'19,'20 Bantayan Kids '13,'14,'15,'17 GTMS ‘18
Join Date: Jan 2011
Location: Zionsville,PA
Posts: 49,300
Thanks: 25,921
Thanked 21,977 Times in 8,938 Posts
Gameroom Barn Bucks: $5976008
|
I was the A/C repair on Sunday myself ( must be a Jeff thing )
Thought the blower motor had dry bearings. Pulled the motor, used a carbide scribe to punch a hole in the cap and added some oil. It was quiet for a little while. Then it started making more noise. Noticed the blower fan had a wobble. Turned it back on and listened to a horrible sound as the fan hub spun against the outer blades. My friend Jack ( my A/C heater guy ) was on a commercial call a couple hours away . Looked up the part on Amazon and the freaking fan lists for almost $190. Cleaned it off , grabbed some EvaDur welding rod and TIG welded the hub to the fan blades.( actually closer to brazing with that low temp rod ) It's working great and my replacement blower fan wheel ( $90 off ebay) will be here Thursday |
||||||
07-27-2021, 8:49pm | #20 | ||||||
Barn Stall Owner #106
Join Date: Jan 2021
Posts: 15,083
Thanks: 12,411
Thanked 3,957 Times in 1,658 Posts
Gameroom Barn Bucks: $500
|
Good luck but nope. I got screwed on a new water heater, New Years day but I’m still here. Can always make more money but Time is scarce and ultimately, finite. I can do a couple of extra deals at my business, throw money at this type of stuff and generally save in the long run.
|
||||||
The Following User Says Thank You to Dan47 For This Useful Post: |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||