![]() |
![]() |
|
C4 Open Discussion General and technical C4 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
![]() |
|
Share | Thread Tools |
![]() |
#1 | ||||||
Vette Barn nOOb
|
![]()
I have a 1987 vet that started leaking oil above the oil filter. I’m fairly certain it is a bad seal above the oil filter adapter and I found a replacement on line but am perplexed on how to remove the adapter. See photo attached. I was told that the nut unscrews but I can’t find a socket to fit and I’m wondering if it isn’t a nut but a pressed part of the adapter and whether the entire adapter unscrews after unhooking the oil lines. All input welcome.
|
||||||
![]() |
![]() |
![]() |
#2 | ||||||
Vette Barn Crew
![]()
|
![]()
Maybe this will help get you going - looks fairly straightforward:
Good luck - Dave |
||||||
![]() |
![]() |
![]() |
#3 | ||||||
Vette Barn nOOb
|
![]()
Thx but I’ve seen this video before and it is an entirely different adapter with separate bolts!
I need to know how to remove mine since the nut(sides are bigger than any sockets that I can find) which makes me believe it is not a nut! If so how do I remove the adapter? Will a strap wrench work to turn the adapter once the oil lines are removed? Is there a special tool? |
||||||
![]() |
![]() |
![]() |
#4 | ||||||
Vette Barn Crew
![]()
|
![]()
I’ve Googled things a bit and agree that the instructions are elusive without a shop manual diagram.
|
||||||
![]() |
![]() |
![]() |
#5 | ||||||
Vette Barn nOOb
|
![]()
Finally was able to remove the adapter! Had to machine a 1 1/8 in socket flat to remove the slants on each face so I could grab the thin nut and crank it off! It comes apart and I attached photos so others can learn!
|
||||||
![]() |
![]() |
![]() |
#6 | ||||||
Vette Barn nOOb
|
![]()
Three photos showing socket befor and after
|
||||||
![]() |
![]() |
![]() |
#7 | ||||||
Vette Barn nOOb
|
![]() |
||||||
![]() |
![]() |
![]() |
#8 | ||||||
Vette Barn Crew
![]()
|
![]()
Sounds like you brilliantly figured it out. Impressive. I’ve learned from it. Not to own an ‘87! Seriously. How often should a 5.7L oil filter adapter enable or directly cause a leak?
|
||||||
![]() |
![]() |
![]() |
#9 | ||||||
Vette Barn nOOb
|
![]()
Once in 32 years!
|
||||||
![]() |
![]() |
![]() |
#10 | ||||||
Vette Barn Crew
![]()
|
![]()
No issues with my C3. Yet.
Now I have to go knock on wood. But, I don’t even see them offered in the two C3 parts catalogs I get, so I’m hoping that is a good omen. Good job getting to the bottom of it. |
||||||
![]() |
![]() |
![]() |
#11 | ||||||
Vette Barn nOOb
|
![]()
Now I need a new seal! Hunted for weeks with no luck! Seal is 3 3/8 in outside diameter! Anyone know where I can find one?
|
||||||
![]() |
![]() |
![]() |
#12 | ||||||
Vette Barn nOOb
|
![]()
Took a regular oil filter and removed rubber gasket. Was a llittle too wide to fit oil cooler so I placed it on a plastic cup so it wouldn’t move around. Then used a Dremel high speed grinder to carefully narrow gasket to fit! Should work.
|
||||||
![]() |
![]() |
![]() |
Thread Tools | |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||