|
 |
|
|||||||
| C5 Open Discussion General and technical C5 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
 |
|
|
Share | Thread Tools | Search this Thread |
03-07-2016, 11:23am
|
#1 | ||||||
|
Vette Barn nOOb
|
C5 Cluth Safety Switch
Ok call me lazy but the clutch safety switch in my C5 manual transmission Corvette is driving my crazy. Is there an easy way to bypass this switch without cutting wires? I want to be able to start the car without holding the clutch all the way down to the floor.
|
||||||
|
|
||||||
|
03-08-2016, 7:56am
|
#2 | ||||||
|
Charter Member - C5 Mod
Barn Stall Owner #41 
Join Date: Oct 2009
Location: hagerstown, md
Posts: 5,812
Thanks: 1,206
Thanked 1,290 Times in 826 Posts
Gameroom Barn Bucks: $8192878
|
Just guessing on this one but your should be able to zip tie it in the "closed" position. Yu wuld have to get under there and look to actually find out.
|
||||||
|
|
|
||||||
|
03-08-2016, 8:46am
|
#3 | ||||||
|
Administrator
Barn Stall Owner #7 Barn Raising I,II,IV NCM Supporter '13,'14
Join Date: Oct 2009
Location: Pewaukee,WI
Posts: 8,237
Thanks: 1,043
Thanked 4,975 Times in 2,213 Posts
Gameroom Barn Bucks: $30682687
|
AsI recall there's two circuits through the clutch switch...One is the starter interrupt, the other disengages cruise control.
When you determine which are the starter wires (sorry i forget the wire colors), just disconnect those two from the switch and connect them together to bypass it. And don't ever forget to depress the clutch when starting! 
|
||||||
|
|
|
||||||
|
| Thread Tools | Search this Thread |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||
|
|
|
|
