Choose your color scheme:
The Vette Barn  
 
Go Back   The Vette Barn > C6 Corvette > C6 Open Discussion

C6 Open Discussion General and technical C6 Corvette discussion - ownership, maintenance, repairs, modifications, tuning

User Tag List

Reply
 
Share Thread Tools Search this Thread
Old 06-16-2010, 8:56pm   #1
thegreenman
Charter Member
Barn Stall Owner #22
Points: 15,494, Level: 85
Activity: 0.4%
 
thegreenman's Avatar
 
Join Date: Oct 2009
Location: South Korea
Posts: 1,961
Thanks: 158
Thanked 292 Times in 181 Posts
Gameroom Barn Bucks: $8878
Default Power Steering Replacement

I have been fighting a small power steering leak for several weeks/months. It would leave a small puddle on the garage floor and spray on my hood after dripping on the belt. I replaced the low pressure hose which felt spongy, which is bad, and it still leaked.

Next I replaced the high pressure hose and it seemed to work for a while then started leaking again.

I am planning on taken the Vette on a trip this fall and wanted to get rid of this leak so this week I replaced the power steering pump. So far I have no idea if it will take care of the problem, only time will tell, I will report back later.

Posting here so if others have a C6 power steering fluid leak they will know what to look for.

If you plan on replacing the power steering pump yourself, the following tools will be needed:

P/S Pulley Remover, J-25034-C
P/S Pulley Installer, J-25033-C

No pictures, pretty straight forward for the mechanically minded.

I had to remove the ABS module so I had to bleed the brakes and getting the air out of the power steering wasn't a problem.
__________________
08 C6 Z51 Coupe with TVS2300, a little more than stock HP/TQ.
thegreenman is offline   Reply With Quote
Old 06-29-2010, 4:10am   #2
pops98
Barn Stall Owner #50
Points: 10,350, Level: 70
Activity: 0%
 
pops98's Avatar
 
Join Date: Jan 2010
Location: Portsmouth
Posts: 271
Thanks: 15
Thanked 36 Times in 23 Posts
Gameroom Barn Bucks: $149318
Default

Jeff, Did you get the problem fixed?
pops98 is offline   Reply With Quote
Old 06-29-2010, 7:41am   #3
Cobra4B
Charter Member
Points: 7,981, Level: 62
Activity: 0.3%
 
Cobra4B's Avatar
 
Join Date: Oct 2009
Location: Virginia Beach
Posts: 1,700
Thanks: 43
Thanked 213 Times in 162 Posts
Gameroom Barn Bucks: $8830
Default

Interesting.... annoying to have to throw parts at it w/o knowing what the root cuase is. Wonder if the extra tension on the accessories from the supercharger setup had anything to do with it? But that should show up via worn out pulley bearings or snapping off a pulley shaft vs. random leaks.
__________________
2001 Quicksilver Z06 - NASA PTA/TTA/ST2 #4
www.carsandcoffeevirginiabeach.com
April 7th, 2012 7:30am-9:30am @ La Promenade
Cobra4B is offline   Reply With Quote
Old 06-29-2010, 8:25am   #4
thegreenman
Charter Member
Barn Stall Owner #22
Points: 15,494, Level: 85
Activity: 0.4%
 
thegreenman's Avatar
 
Join Date: Oct 2009
Location: South Korea
Posts: 1,961
Thanks: 158
Thanked 292 Times in 181 Posts
Gameroom Barn Bucks: $8878
Default

Quote:
Originally Posted by pops98 View Post
Jeff, Did you get the problem fixed?
I haven't leaked a drop since replacing the power steering.


Quote:
Originally Posted by Cobra4B View Post
Interesting.... annoying to have to throw parts at it w/o knowing what the root cuase is. Wonder if the extra tension on the accessories from the supercharger setup had anything to do with it? But that should show up via worn out pulley bearings or snapping off a pulley shaft vs. random leaks.
I could tell it was coming from the power steering pump area, I just couldn't find the source of the leak. I didn't want to tear it apart, have to wait for parts, then put it together. I am thinking I might have tightened the belt to much and the power steering seal might have been damaged. I did find out GM has a TSB for the 06-07's (mine is 08 but most of it was built in 07), if PS leaking then dealer was to replace the high pressure hose. I talked to Kevin at partstaxi.com and he gave me the part number for the new GM replacement hose, but that didn't fix it. On CF, I found several cases of bone stock C6's that had leaking PS pump, but nearly all were covered by warranty and for some reason, I was thinking GM may not honor the warranty due to my bolt ons.

By the way, I checked with Kartech, proper tension for their manual belt tensioner is 25 lb-ft.

Now on to my next problem, tranny is starting to slip when I come down on it. I am talking to Ed @ VA Speed, probably will have him take care of it and a couple of upgrades, but that is another thread.
__________________
08 C6 Z51 Coupe with TVS2300, a little more than stock HP/TQ.
thegreenman is offline   Reply With Quote
Old 06-29-2010, 10:05am   #5
Cobra4B
Charter Member
Points: 7,981, Level: 62
Activity: 0.3%
 
Cobra4B's Avatar
 
Join Date: Oct 2009
Location: Virginia Beach
Posts: 1,700
Thanks: 43
Thanked 213 Times in 162 Posts
Gameroom Barn Bucks: $8830
Default

I could have sworn you're not supposed to use a manual belt tensioner with supercharged applications.
__________________
2001 Quicksilver Z06 - NASA PTA/TTA/ST2 #4
www.carsandcoffeevirginiabeach.com
April 7th, 2012 7:30am-9:30am @ La Promenade
Cobra4B is offline   Reply With Quote
The Following User Says Thank You to Cobra4B For This Useful Post:
Old 06-29-2010, 11:26am   #6
thegreenman
Charter Member
Barn Stall Owner #22
Points: 15,494, Level: 85
Activity: 0.4%
 
thegreenman's Avatar
 
Join Date: Oct 2009
Location: South Korea
Posts: 1,961
Thanks: 158
Thanked 292 Times in 181 Posts
Gameroom Barn Bucks: $8878
Default

Quote:
Originally Posted by Cobra4B View Post
I could have sworn you're not supposed to use a manual belt tensioner with supercharged applications.
Looks like you are right, on Kartech's web site I found "Not recommend for use on supercharged engines unless the supercharger has a dedicated drive". This tensioner came with the SC kit.

I want to get Cartek flip drive later, then I will end up with a dedicated belt for the SC.

Looks like another upgrade before I can put it on the track.

Thanks for the info.
__________________
08 C6 Z51 Coupe with TVS2300, a little more than stock HP/TQ.
thegreenman is offline   Reply With Quote
Old 12-27-2016, 8:17am   #7
CarMinded6
Vette Barn nOOb
Points: 15, Level: 1
Activity: 1.7%
 
CarMinded6's Avatar
 
Join Date: Dec 2016
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Gameroom Barn Bucks: $510
Default

After my power steering cooler went bad, I had it replaced in a shop and right after that noticed a leakage. The fluid leaked right near the pump, so I assumed that apparently someone there broke my pump. Of course, I went to the shop the day after and they determined a leakage of the hose, so they got it replaced (https://www.carid.com/power-steering-coolers/). And since then (it was well over 2 years so far) I've got no problems with the power steering what so ever.
CarMinded6 is offline   Reply With Quote
Reply

The Vette Barn > C6 Corvette > C6 Open Discussion


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 1:07pm.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn


Support the Barn:
 
Download the Mobile App;
 
Follow us on Facebook:

Become a Stall Owner

 

Apple iOS App        Google Android App

 

Visit our Facebook page