One window to go....sigh

[DAB]

I have one remaining window to prep and paint the frame before winter comes. no sweat.

i knew the frame had some issues to address (rotted wood on the sill, dig out, replace with bondo), scrape loose paint and caulk any suspect spots.

the fixed portion (on the left as viewed from outside) has some fogging, and i can see that the spacer has some rust, and the bottom stop is badly peeling and needs replacing. no sweat, pull it off, get the profile figured out, make a new piece in the shop.

pulling out the stop, about 2/3 done, and CRACK. uh oh. cracked the outside pane. time to call the glass guys. take a few measurements, get a rough price (about 130), invite them out to take their own measurements (likely tomorrow).

so get the Bondo job done, and will have to wait to paint until the window gets replaced.

[Mike Mercury]