Henry 30-30

[carlton_fritz]

This is what happens to metal targets that tangle with a Henry. The top part is gone. Never did find it.

[z06psi]

How long is your range?

[carlton_fritz]

Originally Posted by z06psi

How long is your range?

Not nearly long enough. I was visiting a friend.

[69camfrk]

Henry makes a really nice rifle.

[StaticCling]

I have a similar spinner that's only rated up to 44Mag. I've never tried shooting mine with a rifle.

[carlton_fritz]

Originally Posted by chinaski

I have a similar spinner that's only rated up to 44Mag. I've never tried shooting mine with a rifle.

My friend shot that target. I was shooting a thicker target. Too bad I can't get out to 100 yards at his place.

[78SA]

The target claimed to go up to 30-06.

[Brett K]

I bought my daughter a Henry .22 rifle and I really like it. I plan on picking up one the new side gate loading models or a Henry Long Ranger in 6.5 Creedmore.

[MEANZ06]

Those little targets aren't that good for anything other than .22. Spend the money and get some good ones if you want them to last

https://www.shootsteel.com/collectio...-steel-targets

This is what we have you can buy the hangers for 2x4's cheap on amazon. The targets last forever, just repaint and you're good to go

[carlton_fritz]

Originally Posted by MEANZ06

Those little targets aren't that good for anything other than .22. Spend the money and get some good ones if you want them to last

https://www.shootsteel.com/collectio...-steel-targets

This is what we have you can buy the hangers for 2x4's cheap on amazon. The targets last forever, just repaint and you're good to go

I have a AR500 grade target. As long as nobody hits the bolts, it's good to go. Bought 2 cans of paint for it. One black and 1 yellow.Put some yellow dots on it and paint over in black when needed.

[MEANZ06]

Originally Posted by carlton_fritz

I have a AR500 grade target. As long as nobody hits the bolts, it's good to go. Bought 2 cans of paint for it. One black and 1 yellow.Put some yellow dots on it and paint over in black when needed.

We've collected a few to set up, I think we have more now, AR500 is the way to go. Just be careful on thickness, the thicker they are they won't ring

[MEANZ06]

Been painted many times, haven't had an issue with the bolts...



BTW, All my "tools" and "packages" are at the bottom of the lake...

[carlton_fritz]

Originally Posted by MEANZ06

Been painted many times, haven't had an issue with the bolts...



BTW, All my "tools" and "packages" are at the bottom of the lake...

Someone not very good at shooting hit one of the bolts on my target. I didn't do any shooting of a gun that day, so no, it was not me.