Ultimate F.I. setup - what would yours be?

WKMCD · 11-13-2009, 2:26pm

TTix setup on an 433-460 ci aluminum LSX tall deck block (not out yet but coming soon) with 6 bolt ET 245 heads. Should make 1000-1200 HP with not a ton of boost.

YELLOHH · 11-13-2009, 4:26pm

Quote:

Originally Posted by WKMCD

TTix setup on an 433-460 ci aluminum LSX tall deck block (not out yet but coming soon) with 6 bolt ET 245 heads. Should make 1000-1200 HP with not a ton of boost.

How much coin, you figure?

WKMCD · 11-13-2009, 4:49pm

Quote:

Originally Posted by YELLOHH

How much coin, you figure?

22-25K by the time your done. This includes a BIG clutch but not a built rear and tranny. Add another 5k for that or another 6k if its an auto.

Peter Pan · 11-13-2009, 5:30pm

F1R with an LSX 454, ETP LS7 style heads

YELLOHH · 11-13-2009, 5:43pm

Quote:

Originally Posted by WKMCD

22-25K by the time your done. This includes a BIG clutch but not a built rear and tranny. Add another 5k for that or another 6k if its an auto.

Since our cars are now worth < $20k now, that seems like a fantastic investment...

It would be fun to put that powertrain in a Factory Five GTM though.

:auto:

Y2Kvert4me · 11-13-2009, 6:32pm

Quote:

Originally Posted by YELLOHH

Since our cars are now worth < $20k now, that seems like a fantastic investment...

It sounds like a fun way to reward one's self and have fun with the money spent...But unless your build will set some of record that allows you to sell the car profitably (including all you put into it), and/or bank enough in won races to compensate...it's still just a money pit, otherwise known as a poor investment.

That said, I really like Kevin's idea too.

YELLOHH · 11-13-2009, 6:48pm

Say you buy a new Z06 for $7x,xxx. You put $25k in the motor. I get it. But to put $25k in the motor of a $20k car?

There's a company called HPA that made a crazy TT kit for the VW R32. The kit was more than the car itself. It did top out at over 200 mph though.

Y2Kvert4me · 11-13-2009, 7:05pm

Quote:

Originally Posted by YELLOHH

Say you buy a new Z06 for $7x,xxx. You put $25k in the motor. I get it. But to put $25k in the motor of a $20k car?

There's a company called HPA that made a crazy TT kit for the VW R32. The kit was more than the car itself. It did top out at over 200 mph though.

It's not tough at all to put more into the engine/drivetrain than what the car is worth. The cheaper the car, the more that applies.

There were $50k TT 427 engine packages being sold when the C5 was still the new and current model too.

Buying a <$20k C5 and dumping a mega-expensive engine into it might be more cost-effective than buying a new Z06/ZR-1, I agree....but it being a good investment, it definitely is not.

WKMCD · 11-13-2009, 7:52pm

Even investments aren't much of an investment nowadays..

thegreenman · 11-13-2009, 8:54pm

I have a C6 not a C5 but I decided to go with the MagnaCharger TVS1900 for the stump pulling power on the street. I am not done yet, other upgrades in work and planned. Pulley upgrade done, intercooler installed, meth kit in work now and I will post here when I get some time off from work.

If I was to sell the Vette I wouldn't get but a small amount of return that I have put into it, I decided I wanted to invest in fun.

FrickNFrack · 11-13-2009, 10:06pm

I would basically do what I already have.

Maybe a 402ci or a 427ci SC

Peter Pan · 11-14-2009, 9:23am

My Boosted Vette is already a money pit, but I love it and driving it like I stole it

YELLOHH · 11-14-2009, 10:34am

Quote:

Originally Posted by thegreenman

I have a C6 not a C5 but I decided to go with the MagnaCharger TVS1900 for the stump pulling power on the street. I am not done yet, other upgrades in work and planned. Pulley upgrade done, intercooler installed, meth kit in work now and I will post here when I get some time off from work.

If I was to sell the Vette I wouldn't get but a small amount of return that I have put into it, I decided I wanted to invest in fun.

Pretty much sounds like my set up, minus the intercooler.

YELLOHH · 11-14-2009, 10:39am

Quote:

Originally Posted by FrickNFrack

I would basically do what I already have.

Maybe a 402ci or a 427ci SC

What about a 416ci LS3? Why SC over TT?

FrickNFrack · 11-14-2009, 11:46am

Quote:

Originally Posted by YELLOHH

What about a 416ci LS3? Why SC over TT?

No reason for SC over TT. I do like the top mounted TT systems out there

Sneaks · 11-14-2009, 2:47pm

Quote:

Originally Posted by YELLOHH

What about a 416ci LS3? Why SC over TT?

Plumbing two sets of pipes, heat, and cost effectiveness. Priced a TT setup lately?

thegreenman · 11-14-2009, 6:02pm

I am hoping for a 427ci LS3 in a year or so. I went with the SC instead of TT because most of my driving is street performance. I think TT would be better on the drag strip where it can be spooled up before launching. Hard to complain about any SC or TT, each type has it pros and cons, they all kick azz.

Jeffyvette · 11-25-2009, 8:08pm

My 383cc Lingenfelter TT (see the red car in my sig) is a pretty nice set up. Spools quick and makes good power. Basicly 700rwhp and 800 ft/lbs of torque. I am interested to see how it does in the 1 mile shoot out in March in California.
Jeffy'

edcmat-l1 · 12-21-2009, 2:01pm

The bigger motors don't work as well with FI. Less room for head gasket material between cyl, and the strokes too long.

Smaller motors.......

BTW, can't beat the low end of the PDs. Roger's makes 700 ft pounds at about 2500 rpm. Which equates to abso-freegin-useless on the street LOL. But it sho is funn!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Support the Barn:		Download the Mobile App;		Follow us on Facebook: