|
C6 Open Discussion General and technical C6 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
|
Share | Thread Tools | Search this Thread |
03-21-2010, 3:50pm | #1 | ||||||
Charter Member
Barn Stall Owner #22
Join Date: Oct 2009
Location: South Korea
Posts: 1,961
Thanks: 158
Thanked 292 Times in 181 Posts
Gameroom Barn Bucks: $8878
|
Catch Can install question
I am thinking about installing a catch can to capture any oil that might come out of my valve covers, don’t expect any but just to make sure. Right now I have one valve cover connected to vacuum after the TB (per MagnaChargers instructions) and the second valve cover I installed a breather as a temporary solution. I am thinking about connecting both valve covers to the same vacuum source with a catch can between the covers and vacuum. I don’t have a line coming out of my intake manifold due to my TVS 1900.
I would rater pull the fumes out then vent, I believe it will keep the oil a little cleaner. Any thoughts on this setup?
__________________
08 C6 Z51 Coupe with TVS2300, a little more than stock HP/TQ. |
||||||
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||