|
C1 & C2 Corvette Open Discussion General and technical C1 & C2 Corvette discussion - ownership, maintenance, repairs, modifications, restoration |
|
Share | Thread Tools | Search this Thread |
06-19-2014, 10:37am | #1 | ||||||
Vette Barn nOOb
|
62 4-speed shifter question
Hoping someone can help me with this.. Pulled the clutch on my 62 327 4-speed car. On the original shifter there is a 1/4" diameter pin that holds the stick shift to the cross shaft.. That pin was half way out when I removed the shifter. It pushed back to the center easily.. What is supposed to hold it in place?
I added a picture to this post. I hope you can see it. You can see the end of the pin at the lower right . Thanks Alan |
||||||
06-26-2014, 6:30am | #2 | ||||||
Bantayan Kids '13,'14,'15,'17
Join Date: Jan 2011
Location: Canada's capital
Posts: 49,335
Thanks: 14,649
Thanked 18,411 Times in 8,713 Posts
Gameroom Barn Bucks: $4614507
|
Sorry, but the first thing I change out is the shifter to a Hurst so I never have to worry about it again. And that was a long time ago on my 62.
Look in your shop manual or ask on the Corvette Forum C1+2 forum. They're quick with a response and good guys as well. This link should work.... C1 & C2 Corvettes, 1953 - 1967 - Corvette Forum |
||||||
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||