|
C5 Open Discussion General and technical C5 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
|
Share | Thread Tools | Search this Thread |
11-26-2010, 4:56pm | #1 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
Which one is the PCM?
Never mind I found it but I am still wondering if there is a red connecter on it cuz that's what I need to find.
Thanks
__________________
00 MY coupe Some minor tweaks here and there. Last edited by Munch; 11-26-2010 at 5:12pm. |
||||||
11-26-2010, 5:36pm | #2 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
I guess when my instructions said "red connector" they were referring to the part you can't see until you unplug it? I'm guessing yes.
Also, I am looking for pin 10 and pin 24 but I'm confused. On all the plugs I'm used to dealing with the top row is even and the bottom odd. This doesn't appear to be the case in this situation as pin 10 is supposed to be white and 24 dark blue. Oh well, I think I got it figured out but I'll put it up here in case anyone thinks I'm heading in the wrong direction and you can stop me before I go to far.
__________________
00 MY coupe Some minor tweaks here and there. |
||||||
11-26-2010, 5:52pm | #3 | ||||||
Charter Member
Join Date: Oct 2009
Location: Northern VA
Posts: 1,358
Thanks: 52
Thanked 179 Times in 145 Posts
Gameroom Barn Bucks: $5852
|
What are you trying to do?
|
||||||
11-26-2010, 6:10pm | #4 | ||||||
Administrator
Barn Stall Owner #7 Barn Raising I,II,IV NCM Supporter '13,'14
Join Date: Oct 2009
Location: Pewaukee,WI
Posts: 8,215
Thanks: 1,044
Thanked 5,024 Times in 2,237 Posts
Gameroom Barn Bucks: $30682687
|
Pin 10 is the tach out to IPC if I recall. If that's the wire you're looking for, it is definitely a white wire.
I'm out of town till Sunday and don't the service manual handy. If you have it, there should be a pinout diagram amd wire colors of the PCM connectors. |
||||||
11-26-2010, 6:12pm | #5 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
Hooking up my nitrous controller. Pin 24 is for the throttle position sensor and pin 10 is for the RPM pick up. I could go off the coil for the RPM but seen as how I'm down there I can keep all the wires together for neatness sake.
__________________
00 MY coupe Some minor tweaks here and there. |
||||||
11-26-2010, 6:31pm | #6 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
Now I'm screwed. I see the connector has little numbers on it so that's cool but there is no blue wire at pin 24, actually there is no wire at pin 24. The instructions only give this option for the TPS pick up.
__________________
00 MY coupe Some minor tweaks here and there. |
||||||
11-26-2010, 6:37pm | #7 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
OK, I found the blue wire going to the TPS at the throttle body so I'll just tap in there.
Despite what one might think, this thread has proven quite useful.
__________________
00 MY coupe Some minor tweaks here and there. |
||||||
11-26-2010, 7:22pm | #8 | ||||||
Charter Member
Join Date: Oct 2009
Location: Northern VA
Posts: 1,358
Thanks: 52
Thanked 179 Times in 145 Posts
Gameroom Barn Bucks: $5852
|
I picked up my tach signal for the shift light in a bundle at the OBD2 connector under the dash. Let me know if you want more info.
|
||||||
11-26-2010, 7:37pm | #9 | |||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
Quote:
Thanks anyway.
__________________
00 MY coupe Some minor tweaks here and there. |
|||||||
11-26-2010, 9:57pm | #10 | ||||||
Charter Member - C5 Mod
Barn Stall Owner #41
Join Date: Oct 2009
Location: hagerstown, md
Posts: 5,780
Thanks: 1,206
Thanked 1,291 Times in 827 Posts
Gameroom Barn Bucks: $8192878
|
Tach signal at the coil, TPS at the throttle body. That's where I got mine.
__________________
'98 Pewter coupe. A little of this and a little of that..... |
||||||
11-27-2010, 9:00am | #11 | ||||||
Charter Member
Barn Stall Owner #00
Join Date: Oct 2009
Location: Traverse City, MI
Posts: 4,953
Thanks: 462
Thanked 710 Times in 518 Posts
Gameroom Barn Bucks: $2041885
|
That would have been easier too but that's what I get for reading the instructions.
__________________
00 MY coupe Some minor tweaks here and there. |
||||||
11-27-2010, 3:21pm | #12 | ||||||
Charter Member - C5 Mod
Barn Stall Owner #41
Join Date: Oct 2009
Location: hagerstown, md
Posts: 5,780
Thanks: 1,206
Thanked 1,291 Times in 827 Posts
Gameroom Barn Bucks: $8192878
|
I figure it's best to tap a signal as close to the source as possible. That way there is less chance for fluctuation/interference.
__________________
'98 Pewter coupe. A little of this and a little of that..... |
||||||
Thread Tools | Search this Thread |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||