![]() |
![]() |
|
C6 Open Discussion General and technical C6 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
![]() |
|
Share | Thread Tools | Search this Thread |
![]() |
#1 | ||||||
Vette Barn nOOb
|
![]()
So I think I dropped a valve on my 07 Z, I know this has happened to quite a few people! I was just wondering what kind of damage have you all seen come from this and what kind of price tag am I looking at? Has anyone got away with just replacing the heads? And how hard of a task is it to replace the heads? Thanks!
|
||||||
![]() |
![]() |
![]() |
#2 | |||||||
A Real Barner
![]()
Join Date: Jan 2011
Location: NorthernNY! (A little town on the shores of the Great Sacandaga Lake) in the peoples republic of NY
Posts: 10,332
Thanks: 5,522
Thanked 3,396 Times in 1,860 Posts
Gameroom Barn Bucks: $2115673
|
![]() Quote:
Let’s face it that kind of problem normally happens at high RPMs. If your relative competent in auto repairs procedures/ engine work, just changing out the heads CAN be a shade tree job. Cost depends on what’s broke and who is fixing it, could get nasty. Good Luck, Dave (07 Z06) |
|||||||
![]() |
![]() |
![]() |
#3 | ||||||
Vette Barn nOOb
Join Date: May 2015
Location: Northern VA
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
Gameroom Barn Bucks: $505
|
![]()
I've worked on a C6 Z06 with a dropped valve and you would certainly know when it happens. The motor is ripped apart, the valve breaks off and falls into the cylinder, causing massive damage. The one I did, we just replaced the motor under extended warranty, which was lucky for the owner as the bill was over 20 grand. I have some pics to show the carnage.
As for replacing the heads, it isn't to bad if you've got tools and the know how. Be careful timing the motor, to line up all the marks, otherwise you could destroy the new heads you just put in. |
||||||
![]() |
![]() |
![]() |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||