|
Off Topic Off Topic - General non-Corvette related discussion. |
|
Share | Thread Tools | Search this Thread |
07-27-2021, 2:33pm | #1 | ||||||
Chief Electrician
Barn Stall Owner #7734 Bantayan Kids '15
Join Date: Jan 2011
Location: The corner of Cease Rd. and Desist St.
Posts: 44,288
Thanks: 16,986
Thanked 33,598 Times in 13,595 Posts
Gameroom Barn Bucks: $107478
|
AC Repair...wish me luck
Yeah, I called "the guy" and apparently he wants me to finance his summer vacation trip. $2500.00 to install an evaporator coil that I can buy for $320.00.
So I will BE the guy on this one. I'm going to DIY it. Shut the high side off at the condenser, run the pump a SHORT time and shut the low side off. De-solder the coil and slide it out (goes in like a drawer). Slide the new one in and attach. Draw vacuum on the coil and lines and make sure there are no leaks, and then open the condenser back up. What could go wrong? I have literally NOTHING to lose if it works. If it doesn't, I only need to evacuate and refill assuming no leak. |
||||||
07-27-2021, 2:39pm | #2 | ||||||
Chief Meat Gazer
Charter Member Barn Stall Owner #98 Barn Raising II,III,IV
Join Date: Oct 2009
Location: Ohio
Posts: 50,992
Thanks: 23,421
Thanked 33,847 Times in 12,333 Posts
Gameroom Barn Bucks: $5135124
|
|
||||||
The Following 6 Users Say Thank You to Mike Mercury For This Useful Post: |
07-27-2021, 3:03pm | #3 | ||||||
A Real Barner
Join Date: Apr 2019
Location: North Carolina
Posts: 17,219
Thanks: 4,903
Thanked 23,887 Times in 9,911 Posts
Gameroom Barn Bucks: $315482
|
More power to you man... It's not brain surgery anyway.
|
||||||
07-27-2021, 3:04pm | #4 | ||||||
A Real Barner
Join Date: Mar 2019
Posts: 5,679
Thanks: 304
Thanked 11,251 Times in 3,995 Posts
Gameroom Barn Bucks: $29012
|
Anything good to sell?
|
||||||
The Following 4 Users Say Thank You to Murray For This Useful Post: |
07-27-2021, 3:13pm | #5 | ||||||
Chief Electrician
Barn Stall Owner #7734 Bantayan Kids '15
Join Date: Jan 2011
Location: The corner of Cease Rd. and Desist St.
Posts: 44,288
Thanks: 16,986
Thanked 33,598 Times in 13,595 Posts
Gameroom Barn Bucks: $107478
|
|
||||||
07-27-2021, 3:56pm | #6 | ||||||
Barn Stall Owner #122
NCM Supporter '11,'13 Bantayan Kids '13,'14,'17
Join Date: Oct 2009
Location: Gaithersburg, MD.
Posts: 22,543
Thanks: 6,175
Thanked 8,398 Times in 4,251 Posts
Gameroom Barn Bucks: $1158963
|
You are paying $2000 for his knowledge and warranty. So you screw it up, it will be $3000 to fix it.
|
||||||
07-27-2021, 4:11pm | #7 | ||||||
Sparkles Flambeaux
Barn Stall Owner #4 Barn Raising I,II NCM Supporter '13,'14,'15,'16,'17,'21 Bantayan Kids '13,'14,'15,'17
Join Date: Jan 2011
Location: Santa Fe, NM
Posts: 61,462
Thanks: 11,772
Thanked 33,021 Times in 14,161 Posts
Gameroom Barn Bucks: $17500122
|
new AC unit coming up in 3, 2, 1.....
|
||||||
The Following User Says Thank You to DAB For This Useful Post: |
07-27-2021, 4:40pm | #8 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 81,467
Thanks: 36,936
Thanked 41,260 Times in 17,155 Posts
Gameroom Barn Bucks: $2621492
|
Jeff,
Buena suerte! Also, via con Dios, although I hope this one is not necessary. Having said that, if the A coil is leaking, then you'll have to add refrigerant, too. I'm guessing you determined there was a problem when the AC failed to cool properly? I had one of my A coils replaced maybe 8 or 9 years back. You could see the oil spot where the coolant oil was leaking. I was told it had to be replaced, but I always wondered why it couldn't be fixed. A little brazing? |
||||||
07-27-2021, 4:58pm | #9 | |||||||
A Real Barner
Join Date: Apr 2019
Location: North Carolina
Posts: 17,219
Thanks: 4,903
Thanked 23,887 Times in 9,911 Posts
Gameroom Barn Bucks: $315482
|
Quote:
|
|||||||
The Following 5 Users Say Thank You to Rodnok1 For This Useful Post: |
07-27-2021, 5:46pm | #10 | ||||||
Barn Stall Owner #THX1138
Join Date: May 2011
Location: South of San Antonio
Posts: 2,813
Thanks: 1,048
Thanked 2,199 Times in 992 Posts
Gameroom Barn Bucks: $1322
|
Compressor went out on my unit early last year, I wasn't paying the stupid tax either. Bought a set of digital gauges, a vacuum pump, and a new 2.5t condenser for $1k. Put that bitch in and been rocking the cool ever since. Commercial can be pretty complex, but just how hard is a residential unit. I can replace the damned thing every 5 years and still come out ahead.
|
||||||
07-27-2021, 6:03pm | #11 | ||||||
A Real Barner
Join Date: Feb 2012
Posts: 7,943
Thanks: 193
Thanked 4,374 Times in 2,396 Posts
Gameroom Barn Bucks: $15637580
|
Might be cheaper to relocate to Michigan where people only use AC to annoy the neighbors.
|
||||||
The Following 3 Users Say Thank You to Torqaholic For This Useful Post: |
07-27-2021, 6:06pm | #12 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 81,467
Thanks: 36,936
Thanked 41,260 Times in 17,155 Posts
Gameroom Barn Bucks: $2621492
|
|
||||||
The Following User Says Thank You to Bill For This Useful Post: |
07-27-2021, 6:08pm | #13 | ||||||
Barn Stall Owner #74
Barn Raising II Bantayan Kids '13,'17
Join Date: Jan 2011
Location: On an island somewhere
Posts: 23,650
Thanks: 3,828
Thanked 14,829 Times in 6,552 Posts
Gameroom Barn Bucks: $10393746
|
Please video this procedure
|
||||||
07-27-2021, 6:33pm | #14 | ||||||
Sparkles Flambeaux
Barn Stall Owner #4 Barn Raising I,II NCM Supporter '13,'14,'15,'16,'17,'21 Bantayan Kids '13,'14,'15,'17
Join Date: Jan 2011
Location: Santa Fe, NM
Posts: 61,462
Thanks: 11,772
Thanked 33,021 Times in 14,161 Posts
Gameroom Barn Bucks: $17500122
|
only my truck has AC. none in the house.
|
||||||
07-27-2021, 6:54pm | #15 | ||||||
Barn Stall Owner #113
Bantayan Kids '14
Join Date: Apr 2010
Location: Here to make friends
Posts: 85,029
Thanks: 73,340
Thanked 16,985 Times in 6,927 Posts
Gameroom Barn Bucks: $306898
|
After seeing what you can do with wire, I'm sure you'll get this fixed in no time
|
||||||
The Following 4 Users Say Thank You to The_Dude For This Useful Post: |
07-27-2021, 6:56pm | #16 | ||||||
VB Dad of the Year
RDBM Barn Stall Owner #9 Barn Raising I,II NCM Supporter '11,'12,'13,'14,'15,'16,'17,'19,'20,'21 Bantayan Kids '13,'14,'15,'17 GTMS ‘18
Join Date: Jan 2011
Location: Fort Myers
Posts: 36,628
Thanks: 10,216
Thanked 21,135 Times in 8,338 Posts
Gameroom Barn Bucks: $35999378
|
|
||||||
07-27-2021, 7:01pm | #17 | ||||||
2020 Election Expert
Join Date: Sep 2011
Location: Big Sky Country... Where the men are men, the sheep are nervous, and the winters are LOOONG!!!
Posts: 32,338
Thanks: 22,299
Thanked 19,556 Times in 7,273 Posts
Gameroom Barn Bucks: $1134156
|
Call the guy
/thread |
||||||
07-27-2021, 7:13pm | #18 | ||||||
10cm member
Barn Stall Owner #90125 NCM Supporter '19,'20
Join Date: Jan 2011
Location: Houston, Tejas, Estados Unidos
Posts: 81,467
Thanks: 36,936
Thanked 41,260 Times in 17,155 Posts
Gameroom Barn Bucks: $2621492
|
The guy that did mine years ago used the compressor itself to suck the remaining freon from the system into the compressor, and to hold it in the compressor. He R&R'ed the A coil, added freon, and voila, cold air again. I thought he'd have to have a separate canister and equipment to pull a vacuum to recover and hold the freon, but no......
|
||||||
07-27-2021, 8:06pm | #19 | ||||||
Barn Stall Owner #327
NCM Supporter '16,'17,'19,'20 Bantayan Kids '13,'14,'15,'17 GTMS ‘18
Join Date: Jan 2011
Location: Zionsville,PA
Posts: 49,111
Thanks: 25,791
Thanked 21,884 Times in 8,903 Posts
Gameroom Barn Bucks: $5976008
|
I was the A/C repair on Sunday myself ( must be a Jeff thing )
Thought the blower motor had dry bearings. Pulled the motor, used a carbide scribe to punch a hole in the cap and added some oil. It was quiet for a little while. Then it started making more noise. Noticed the blower fan had a wobble. Turned it back on and listened to a horrible sound as the fan hub spun against the outer blades. My friend Jack ( my A/C heater guy ) was on a commercial call a couple hours away . Looked up the part on Amazon and the freaking fan lists for almost $190. Cleaned it off , grabbed some EvaDur welding rod and TIG welded the hub to the fan blades.( actually closer to brazing with that low temp rod ) It's working great and my replacement blower fan wheel ( $90 off ebay) will be here Thursday |
||||||
07-27-2021, 8:49pm | #20 | ||||||
Barn Stall Owner #106
Join Date: Jan 2021
Posts: 15,084
Thanks: 12,411
Thanked 3,956 Times in 1,657 Posts
Gameroom Barn Bucks: $500
|
Good luck but nope. I got screwed on a new water heater, New Years day but I’m still here. Can always make more money but Time is scarce and ultimately, finite. I can do a couple of extra deals at my business, throw money at this type of stuff and generally save in the long run.
|
||||||
The Following User Says Thank You to Dan47 For This Useful Post: |
Thread Tools | Search this Thread |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||