|
 |
|
|||||||
| C5 Open Discussion General and technical C5 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
 |
|
|
Share | Thread Tools | Search this Thread |
03-20-2014, 10:20am
|
#1 | ||||||
|
Charter Member
Barn Raising I 
Join Date: Oct 2009
Posts: 11,591
Thanks: 6,027
Thanked 3,353 Times in 1,611 Posts
Gameroom Barn Bucks: $10432620
|
Door Controls Not Working???
The window and locks for my passenger door have stopped working. Anybody know what's going on and/or how to fix this? It's pretty irritating.
|
||||||
|
|
||||||
|
03-20-2014, 10:59am
|
#2 | ||||||
|
Administrator
Barn Stall Owner #7 Barn Raising I,II,IV NCM Supporter '13,'14
Join Date: Oct 2009
Location: Pewaukee,WI
Posts: 8,217
Thanks: 1,044
Thanked 5,025 Times in 2,238 Posts
Gameroom Barn Bucks: $30682687
|
Two most common causes:
1. The wires/connector in the accordion tube between the door and car. The accordion can be pulled back to expose and inspect the connector for corrosion/loose connection, and/or wires that may have worn through the insulation. 2. The pass. door control module is bad. This is located in the door and contains the relays for the lock/window functions. Easily accessed with door panel removed. Though left and right door modules are different, I seem to recall they can be swapped for testing purposes. Replacement modules can be found for about $100. |
||||||
|
|
|
||||||
|
04-10-2014, 8:58am
|
#3 | ||||||
|
Vette Barn Regular
Join Date: Nov 2009
Location: D-Ville
Posts: 64
Thanks: 0
Thanked 16 Times in 12 Posts
Gameroom Barn Bucks: $870
|
Smiler thing happened to me...Bad ground wire in drivers door connector on car side. Not door side. I used a pick to push the female side of the connecter back together and all is good for three years now.
|
||||||
|
|
|
||||||
| The Following User Says Thank You to Shagster For This Useful Post: |
|
| Thread Tools | Search this Thread |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||
|
|
|
|
