![]() |
![]() |
|
C4 Open Discussion General and technical C4 Corvette discussion - ownership, maintenance, repairs, modifications, tuning |
![]() |
|
Share | Thread Tools | Search this Thread |
![]() |
#1 | ||||||
Barn Stall Owner #204
![]()
Join Date: Mar 2013
Location: Aberdeen, South Dakota
Posts: 1,096
Thanks: 470
Thanked 490 Times in 214 Posts
Gameroom Barn Bucks: $403724
|
![]()
The 1995 coupe I recently purchased has a few defects for me to work on. Installing a new emblem on the hood and the rear gas lid helped add a little sparkle to the car. The door handles have a few scratches which detract from its appearance, so I purchased some rubber sticky-backed door step tread from my local Mac's hardware store. I cut it down to 1.25 x 5.5 inches and stuck it on the door handle openings. It will prevent future scratches from happening too, I hope. This is the rubber tread. I had to go to a couple places to find it because most of the places had the tread that is more like black sandpaper and I didn't want that on my door handles. I saw the static cling ones in a couple of Vette parts & accessory catalogs, but was afraid it might come off too easily, so I opted for the sticky tread stuff. See attached picture.
|
||||||
![]() |
![]() |
![]() |
#2 | ||||||
Chief Electrician
Barn Stall Owner #7734 Bantayan Kids '15 ![]()
Join Date: Jan 2011
Location: The corner of Cease Rd. and Desist St.
Posts: 44,393
Thanks: 17,023
Thanked 33,656 Times in 13,628 Posts
Gameroom Barn Bucks: $107478
|
![]()
Are you able to remove them and straighten them?
![]() I couldn't resist. ![]() |
||||||
![]() |
![]() |
![]() |
|
|
Support the Barn: |
Download the Mobile App; |
Follow us on Facebook: |
||