4 inch angle iron for a bracket

[thegreenman]

Anyone know where I can buy a 4 inch by 4 inch piece of angle iron, about 1/8 thick. I ran around this morning looked at a couple of places and had not luck. Looking for something on the peninsula in Hampton Roads VA. Alternate option would be a plate I could cut and weld to the shape I want.

I need to make a bracket for a pump, steel, no aluminum.

TIA

This is what I need to make;

[nedih rotaredom]

Come over to the house tomorrow or Sunday.
I can find ya something

[thegreenman]

Originally Posted by nedih rotaredom

Come over to the house tomorrow or Sunday.
I can find ya something

Thanks, you are okay despite what Joe says about you.

Tell me which day is best, I work both days this weekend and get off around noon.

[zz4vetteguy]

Originally Posted by thegreenman

Thanks, you are okay despite what Joe says about you.

Tell me which day is best, I work both days this weekend and get off around noon.

I never say anything bad about my drag racing sensei

[nedih rotaredom]

Well............Homey picked one of these:

[thegreenman]

Top one, but it is 4 inches shorter now.

Do you want me to bring the rest back to you tomorrow, I can be there a little after 4PM or whatever time is good for you.

Thanks for your help/

[YorkL8apex]

Wow are you mounting a grass bag on the Vette mower with that piece of steel?

[thegreenman]

That's it, I plan on putting the bagger in the back so it doesn't get the track dirty.

[nedih rotaredom]

Originally Posted by thegreenman

Top one, but it is 4 inches shorter now.

Do you want me to bring the rest back to you tomorrow, I can be there a little after 4PM or whatever time is good for you.

Thanks for your help/

After 4 is fine Jeff

[thegreenman]

Originally Posted by nedih rotaredom

After 4 is fine Jeff

Sounds good, see you then, thanks Steve.

[nedih rotaredom]

Originally Posted by YorkL8apex

Wow are you mounting a grass bag on the Vette mower with that piece of steel?

Actually...........I have talked him into twin turboing his supercharged car these plates will hold the turbos. Looking at 2,000 rwhp+

[thegreenman]

Originally Posted by nedih rotaredom

Actually...........I have talked him into twin turboing his supercharged car these plates will hold the turbos. Looking at 2,000 rwhp+

I didn't think you were going to tell anyone, now the cat is out of the bag.