New Utility Sink

[LATB]

Originally Posted by Unsuspicious

Oh yeah, I had to tighten that part when I first moved in because it was leaking a little bit. Makes sense. How will I find a spout that will fit though? What info do I need? Probably have to go online?

Amazon.
and there are different threads so that takes a bit of luck or diligence. BTDT

[LATB]

Originally Posted by 6spdC6

Function over form! -

because engineer.

[ZipZap]

Wow. Finally got back and saw this. The block under your faucet is a "stock" size that are easily obtainable. The one in the stock pic looks custom like a cut down stud. Either way works. With the plastic block, you need to be close on the plumbing and with the custome you just need to be able to cut to size.

I love PEX. I would not use it in this application.

You have plenty of room to cut and insert a slip joint and new laundry faucet.

https://www.homedepot.com/p/Glacier-...0001/206576360

[ZipZap]

Originally Posted by ZipZap

Wow. Finally got back and saw this. The block under your faucet is a "stock" size that are easily obtainable. The one in the stock pic looks custom like a cut down stud. Either way works. With the plastic block, you need to be close on the plumbing and with the custome you just need to be able to cut to size.

I love PEX. I would not use it in this application.

You have plenty of room to cut and insert a slip joint and new laundry faucet.

https://www.homedepot.com/p/Glacier-...0001/206576360

I take it back. The other block is a plastic one as well.

[Vandelay Industries]

Originally Posted by Yadkin

Wrong. First, it's a stick photo. Nice white granite counter. Clean stainless steel undermount sink. Exposed copper plumbing. Layers of paint on an old block wall. Original casement window. Old School.

Stick photo?

[ZipZap]

Originally Posted by Yadkin

Wrong. First, it's a stick photo. Nice white granite counter. Clean stainless steel undermount sink. Exposed copper plumbing. Layers of paint on an old block wall. Original casement window. Old School.

Are you satisfied with the alignment?

[Yadkin]

Originally Posted by 6spdC6

Function over form! -

For a basement utility sink- you betcha.

[Vandelay Industries]

Originally Posted by Yadkin

For a basement utility sink- you betcha.

I don't disagree. I picked up this slop sink as a clearance deal at Lowe's a couple years ago...$25. It gets the job done and defiantly doesn't need to be fancy. My wife uses it for cleanup in her pottery studio, and I use it when I need to get degreased or whatever. It's also great for cleaning the hot tub filter.