Quote:
Originally Posted by Strats-N-Vettes
I mean mock up portions on the floor first using same dimensions as overhead.
|
Not as easy as one might think. In order to do that in this situation, I would have to dismantle the curves, set on floor, mock up the track on the curves, then re-install the track base.....not going to work in this case.
The outer and inner curves are not the same size in length or angle, outer is longer, inner is shorter, and at the angles already cut on base, it will not match to meet the straight-a-ways stretches, which are not adjustable tolerance-wise. I'm dealing here with 1/32" in exact track rail meet.
My ass backwards attempt to sure-up track rail meet-up is working, I got time, retired and all.