Below is the product list Mike gave me for SMC body work.
i used this for the filler....
http://www.evercoat.com/productDetail.aspx?pID=40
and used this to bond the filler plates on as well as a filler around the gap between the filler plate and door handle prior to using the smc filler over the plates...
http://partimages.genpt.com/largeimages/271455.jpg you can get both at NAPA paint stores....
also get some glaze for the final touch after the filler portion to finish things off.
http://www.evercoat.com/productDetail.aspx?pID=1
Primer i used, expensive, but works great... again NAPA paint store.
http://www.repaintsupply.com/prod_im...lowup/7631.jpg
besides sand paper, and time this is should be your parts list.