I will be willing to bet it was lowered by the previous owner. Simple fix (as long as the ride height adjustment bolts are not froze). Jack the front end up. At the end of each spring, you will see a bolt that goes through the spring. If it is backed out all the way you will only see a rubber pad on the lower part of the bolt. That rides on the lower A-Arm.
If that is what you see, simply put a bottle jack under teh spring near the bolt and jack it up until the spring and bolt at clear. Then simply take a 10mm wrench and turn it so more bolt shows below the spring. Not sure of the correct amount of bolt you need to meet the factory settings.
It is a simple job. I have lowered and raise mine and then lowered it again.
|