Thread: Catch Can install question
View Single Post
Old 03-21-2010, 3:50pm   #1
thegreenman
Charter Member
Barn Stall Owner #22
Points: 15,494, Level: 85
Activity: 0.4%
 
thegreenman's Avatar
 
Join Date: Oct 2009
Location: South Korea
Posts: 1,961
Thanks: 158
Thanked 292 Times in 181 Posts
Gameroom Barn Bucks: $8878
Default Catch Can install question
I am thinking about installing a catch can to capture any oil that might come out of my valve covers, don’t expect any but just to make sure. Right now I have one valve cover connected to vacuum after the TB (per MagnaChargers instructions) and the second valve cover I installed a breather as a temporary solution. I am thinking about connecting both valve covers to the same vacuum source with a catch can between the covers and vacuum. I don’t have a line coming out of my intake manifold due to my TVS 1900.

I would rater pull the fumes out then vent, I believe it will keep the oil a little cleaner.

Any thoughts on this setup?
__________________
08 C6 Z51 Coupe with TVS2300, a little more than stock HP/TQ.
thegreenman is offline   Reply With Quote