View Single Post
Old 12-03-2019, 8:56pm   #9
JRD77VET
Barn Stall Owner #327
NCM Supporter '16,'17,'19,'20
Bantayan Kids '13,'14,'15,'17
GTMS ‘18
Points: 116,380, Level: 100
Activity: 8.3%
 
JRD77VET's Avatar
 
Join Date: Jan 2011
Location: Zionsville,PA
Posts: 49,158
Thanks: 25,826
Thanked 21,887 Times in 8,906 Posts
Gameroom Barn Bucks: $5976008
Default

That dude was extremely lucky


Quote:
Originally Posted by aerovette View Post
Magnesium burns damn hot and is difficult to extinguish.
It burns under water too. They showed that in science class in 7th grade.

Quote:
Originally Posted by Cybercowboy View Post
Solid rocket motors have fuel made from butyl rubber, aluminum, and magnesium ground up to the consistency of course gravel. And it burns good.
At my previous employer, I made the compressing "jack" that filled the solid rocket boosters with a wet slurry. The base plate was a piece of 8" thick steel plate that was 48" by 60" . That's over 6500 lbs just for that plate.

Once the booster were filled with the wet slurry, they were moved to building a few miles away from anything to dry.

Once they are lit/burning, the only way they go out is when they burn up all the fuel.

Quote:
Originally Posted by Lakota View Post
Magnesium is a heavy metal and the only way to extinguish is with a "special Class D fire extinguisher" or dry sand. The Class D extinguisher or sand will act as a smothering agent on the metal fire.

Most fire extinguishers are Class A-B-C.
We had a job where we had to weld magnesium. We were REQUIRED to have someone in the welding area with a Class D fire extinguisher ready to put out a fire when the welder was welding.
JRD77VET is offline   Reply With Quote