[RedLS1GTO]

For sale is a complete AP/Hardbar T1 brake setup + C6 knuckles + lines + spares.

Price is $2,200 + actual shipping from 40218.

(Will deliver anywhere in Louisville/Cincinnati area.)

Included is the following:

• Complete AP/Hardbar T1 front brake system
  
  $2,650 new (does not include pads or lines)
  
  HARDBARUSA.com
  
  
• Spiegler stainless brake lines (front)
  
  $79.06 new
  
  Essex - Spiegler Stainless Steel Front Brake Lines C5 Corvette
  
  
• C6 front knuckles, modified for T1 brake kit.
  
  This kit requires trimming some extra casting material from the knuckles to fit the new brackets. These are genuine GM parts, not some knockoff.
  
  ~$300/pair new
  
  2011 Chevrolet Corvette Parts - GM Parts | GM Accessories | GM Parts House Store
  
  
• 1 Spare ring LEFT ONLY. Ring pictured below. Used with some heat checking but still a lot of life left in it.
  
  
• Track pads included as follows:

  - 1 set Ferodo 1.11 – Used - ~11mm pad material remaining
  
  Essex - Ferodo DS1-11 Brake Pads
  
  - 1 set Wilwood Polymatrix “A” – New. These pads are the thinner 16.5mm SL6 width vs. the 20mm AP width, but the same backing plate and work very well.
  
  Wilwood High Performance Disc Brakes - Brake Pad Part Number: 15A-6704K
  
  - 1 set REAR Ferodo 1.11 pads – Used - ~6.2 mm remaining. Pads have some “chunking” on the edges but are still very usable. PERFECT balance on my car with the 11.1s up front.
  
  Essex - Ferodo DS1.11 Rear Brake Pads

• Street pads: 1 set Wilwood BP-10, like new with minimal use. I use these on stock NAPA rotors for the street and switched to track pads and the AP rotors for the track.

Lots of pictures. If there is anything you want to see, let me know.





Right rotor:




Left rotor:




Spare left ring:



Front pads:





Rear pads: