I managed to install the heavy duty belt tensioner today, 3" idler pulley and 10-rib belt.
The plate for the belt tensioner didn't lineup, hit the mount points with the drill then I was able to mount.
Next problem, the belt tensioner plate extended into the location of the power steering reservoir. I was able to bolt the stock power steering reservoir bracket to the belt tensioner bracket, all is good now.
Installed earlier, difference between 10-rib water pump and stock water pump.
Really heavy duty belt tensioner, I had to pop the cap to remove the bolt to install the 10-rib pulley.
New location of the power steering pump reservoir, only moved about two inches from magnacharger install location.
The 10-rib kit came with 3.5" idler pulley to go under the TVS 2300 intake, to big to fit. I ordered a 3" pulley, to clear the TVS, I had to grind the flange off as it was touching the TVS. I need to search for another pulley but this will work for now.
Finally running on 10-rib belt.