Thanks guys. I got the trouble shooting procedures for all codes on the C5 corvette from a friend of mine who works a at Bosch
He told me they are the same procedures that the mechanics use to diagnose an issue. I am gonna shoot the wires this weekend for the speed sensor and hopefully that will be the issue and not the ebtcm. I can spread these procedures around if anyone needs them it breaks the codes down step by step and tells you what wires to check and what resistance is needed for the part to be good or bad. Pretty useful if your good with an ohm meeter and can read a wire schematic. Again thanks for the help and I will fallow up after the weekend with what I found.
|