To note: I have yet to clear the RR fender, it still looks a little dull, there is a spot on the back where I guess I hit it getting up and Ive got to sand it out and then ill clear it.
The real test is, as you can see on the LR fender above the trim, someone has used an incorrect color paint ot touchup a chip...so, im unsure how to proceed, I thin Ill mask it off, to just that section, sand it with some 100 grit, then just base coat over it 2 coats, then take off the masking and feather with the 3rd coat, then clear the whole section, then 1500 wet the section...about all I can come up with to make it blend with nothing to break it up against.
|