[BarryBum]

Heres another one I did recently for less than $10. It lights up the area where most of us put the chrome cover for the fuel tank between the exhaust.
Here goes, hope you enjoy!!

Here is the lights as they come out of the pack


Take your tag off


Remove your back up plate assembly


Take out 1 of your tag lights


I ran a long zip tie down from the back plate down the bumper cover


Here you can see the bottom of the bumper cover where the long zip tie came out of the bottom of the cover


Pull the 51" long LED pigtail up to where the tag light is


Cut the wires going to the tag light, and using butt connectors splice the LED lights in line


Tidy the remaining wire up before buttoning everything up


Here is the LED's hanging getting ready to be installed


After wiping down the area for the LED's to be stuck, secure LED's by peeling the backing off and sticking in place


Finished job after only 30 minutes


Another finished shot


Products and equipment to be used for mod