12-02-2020, 8:34pm
|
#23
|
A Real Barner
Points: 22,637, Level: 100 |
Join Date: Aug 2013
Location: sweatin' on the oldies
Posts: 13,807
Thanks: 8,238
Thanked 3,861 Times in 2,223 Posts
Gameroom Barn Bucks: $1000483
|
Quote:
Originally Posted by aerovette
CAN I PAINT OVER POR-15 WITH OTHER PAINTS?
Absolutely. POR-15 will accept all paints, including lacquer-based paints. POR-15 Tie-Coat Primer is the best prime coat to use before topcoating POR-15. Be sure to read thoroughly our directions and tip sheets regarding topcoating before using POR-15.
WHAT IS THE BEST SURFACE ON WHICH TO PAINT POR-15?
POR-15 likes rusted surfaces best. Seasoned metal and sandblasted metal are also good. POR-15 does not adhere well to smooth, shiny surfaces, but will adhere well to those surfaces with the proper preparation.
WHAT IS THE 'PROPER PREPARATION'?
We make a product called 'Metal-Ready'. It's a rust remover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15. NOTE: New steel is coated with a protective oil finish at the mill. This finish must be removed before using POR-15 or Metal-Ready. Clean metal first with POR-15 Marine-Clean, then rinse with water and dry.
CAN I USE BODY FILLER OR PUTTY WITH POR-15?
Yes. First paint both sides of the rusted area with POR-15; then use body filler or putty as soon as the POR-15 is dry to the touch.
|
Hope it works for you. It sticks best to rust, but remove the rust first with metal ready and be sure to seal it in with their tie-coat primer before you topcoat?
|
|
|