Skip the inexpensive air impact, it'll never get you close.
Best bet is 1 inch drive socket set and a cheater bar. HF set has never failed me and I've used 6 ft bars on it. I did snap an extension tip off and it left a mark...
I have a beast of air impact and it won't goto 300 without some serious pressure and flow from a large compressor.
Anything over @200 will destroy most tools. A 300ft lb torque wrench should be 3/4 inch drive also.
Parts are always over retail when a shop charges you, we used to include recommended prices on invoices when sold them the parts.
|