[NCC-1701]

I went to the range today and shot 200 rounds threw this ATI 45 made in the Philippines and the report is pretty bad. From the 200 rounds I shot about 170 were failure to feed rounds that I had to constantly slam the slide forward. At times if I shot fast all the rounds would feed but when I tried to double tap or single shot the failure to feed occurred. I have ordered from Brownells a colt defender spring and spring guide assembly and two kimber magazines. I am also in the process of polishing the ramp that leads the round to the barrel although I believe that is not the issue. I also ordered an extractor because the brass kept bouncing off my forehead and top of my head the extractor head appears to me to be too short.

On the good side when it shot rite it was great not a lot of kick because the weight of the gun and it was pretty accurate. If these adjustments fix the aforementioned issues I'll be into this thing about 370.00 more or less which is still good.