[Munch]

Yeah one of my bolts had a taper on the end, found out which hole that went in by trial and error. I bolted the alt bracket on and then went to put the PS pump on and discovered it wont work that way. Pulled the bracket back off and had to put 2 of the bolts in and then the pump and then try to hold the whole thing with one hand as I got the line connected and then could start the pump bolts. Then I had to start the 2 alt brkt bolts and put them in with a box wrench. The last 2 bolts were easy but had to take them back out because my nitrous kit has longer bolts with spacers to move the PS reservoir out.

It's all in and pretty now and about to put the alt back on and then the belt. I hope I don't have to replace the belt because it got PS fluid on it, well see.