Found the "paint" drawing I did for a friend who wanted a slightly smaller footprint than mine.
Think Red would be proud of my paint drawing?
~~~~~~~~~~~~~~~~~~
Here is a crude "paint" drawing of the bench I made for reloading. It's extremely sturdy
4x4's (red ) in the four corners ( on my bench, I have center supports too )
The top OUTER frame and the lower INNER frame are 2x4's
The green is also 2x4's but laid down instead of upright.
Everything is screwed together with deck screws. The table top is a solid core door and that is also screwed in place from the underside.