I originally scanned it with an old MT2500 Code Scanner and it showed "Coolant Temp Sensor" was out... So I replaced both the Coolant Temp Sensor and the O2 Sensor...
It showed the check engine light on, only this time the car runs a few seconds before it comes on... Where before it was on right away as soon as you started it...
So I re-scanned it again with the Snap On MT2500 and it showed no codes this time?
I also unscrewed the Gas Cap thinking that might be it... Still Engine Check Light... Then tightened the cap and still Engine Check Light...
Im stumped now...
Thanks for your help..
Steve
|