Quote:
Originally Posted by Eagleeye
What does the cover on the driver's side have for openings. One side should be "straight through" for oil filling and the other cover should have an oil restricting baffle under the cover and mount the vent over that one. Someone else chime in here too !
|
I'm running the solid cover on the other side. These GMPP covers have no baffles under them at all, although there are some bosses that could be tapped and used to mount something homemade. I think what I'm going to do is use an old skool AC Delco FB-59 push in plastic breather in the short term, at least until after the event in Indy next week. Afterwards I'll find a place to mount a remote breather can and either weld an AN-6 weld fitting directly to the VC, or use a NPT threaded 90° adapter in a grommet. I may even consider buying another blank cover and using that for an even cleaner appearance.