A/F gauge going nuts
I installed a 2 gauge pod, Autometer A/F and Fuel Pressure gauges. Wired up the A/F gauge per instructions, and this things bounces all over the place like a crackhead on the rock! Sweeps from lean to rich like it was working as a disco light! Never remains in one area(lean, stoich, rich) for more than a second or two.
I checked the electrical connections, all good. Instructions say to connect the purple wire from the gauge to the PCM side purple wire of the connector. For you guys that have an A/F gauge, where is your wires connected? Red(power), black(ground) purple?????
Thanks guys!
Sneaks
__________________
'98 Pewter coupe. A little of this and a little of that.....
|