Oh the tedium. Spent four hours ironing out the circuits for the secondary hull and engines. 19 circuits. Over 30 wires. Many tie together. I made jumper wires with the correct colors for hook up to the circuit board.
I also connected the part where the model mounts. It has to be strong so I used 3M structural adhesive. I’ve been using it on high stress points.
Finally I used a special tool to describe the panel lines lost to filling and sanding.
Next, crazy Aztec painting on body and engines. I am switching to clear lacquer with pearl pigment to see if I can get more luminance. We shall see.
|