Any ideas?
I have a 1992 coupe that needs a drivers side power window motor replaced. The window is about 3/4ths of the way down. The motor is below the bottom edge of the inner door frame. Do I have to remove all of the hardware that the FSM says to remove to get to this motor. In other words. Do I have to drill out the rivets and remove the door pull and the entire metal accessory plate. It looks like aluminum and covers the entire door opening. I have no clue what I am doing. I am not even sure it's the motor. I replaced the switch to no avail but I need to be able to get to the motor to test it. Right now the window is down too far to do that. How in the world can I get the window up far enough to test the motor? Thanks for any help you can give.
|