The D200 is equipped with a ten-pin remote terminal for remote control and automatic photography. The terminal is provided with a cap,
which protects the contacts when the terminal
is not in use. The following accessories can be
used (cable lengths are given in parentheses; all figures are approximate):
♦
MC-22 Remote Cord
(1 m/3 ft. 3 in.): Remote shutter release with blue, yellow,
and black terminals for connection to a remote shutter-triggering device, al-
lowing control via sound or electronic signals.
♦
MC-30 Remote Cord
(80 cm/2 ft. 7 in.): Remote shutter release; can be used to
reduce camera shake or keep the shutter open during a time exposure.
♦
MC-36 Remote Cord
(85 cm/2 ft. 9 in.): Remote shutter release; can be used to
reduce camera shake or keep the shutter open during a time exposure.
Equipped with back-lit control panel, shutter-release lock for use in bulb
photography, and timer that beeps at one-second intervals.
♦
MC-21 Extension Cord
(3 m/9 ft. 10 in.): Can be connected to MC-series 20, 22, 23,
25, 30, or 36.
♦
MC-23 Connecting Cord
(40 cm/1 ft. 4 in.): Connects two cameras for simultaneous operation.
♦
MC-25 Adapter Cord
(20 cm/8 in.): Ten-pin to two-pin adapter cord for connec-
tion to devices with two-pin terminals, including the MW-2 radio control set,
MT-2 intervalometer, and ML-2 modulite control set.
♦
MC-35 GPS Adapter Cord
(35 cm/1 ft. 2 in.): Connects camera to compatible GPS
devices via PC cable supplied by manufacturer of GPS device, allowing lati-
tude, longitude, altitude, and UTC (Coordinated Universal Time) to be record-
ed with photographs (96).
♦
ML-3 Modulite Control Set
: Allows infrared remote control at ranges of up to 8 m
(26 ft.)
From
Your Manual