The Vette Barn
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

The Vette Barn (https://www.thevettebarn.com/forums/index.php)
-   Off Topic (https://www.thevettebarn.com/forums/forumdisplay.php?f=38)
-   -   Chrysler engine - $500 (https://www.thevettebarn.com/forums/showthread.php?t=124216)

Mike Mercury 12-02-2020 3:31pm
Chrysler engine - $500
 
ran when pulled.

https://images.craigslist.org/00R0R_...MM_600x450.jpg


https://dayton.craigslist.org/pts/d/...240535801.html

mrvette 12-02-2020 3:36pm
Seize that one!!!

but no quick turnover.....

:lol:

snide 12-02-2020 4:05pm
Shut up and take my money.

Bill 12-02-2020 4:10pm
No chromed valve covers. Would not buy.

Rodnok1 12-02-2020 4:21pm
Attention Rikki.. We have found your engine

Grey Ghost 12-02-2020 5:23pm
Kinda' rare, I believe, if no holes or cracks in block/heads.


"Tach it up, tach it up
Buddy gonna shut you down
It happened on the strip where the road is wide
Two cool shorts standin' side by side
Yeah, my fuel injected Stingray and a four-thirteen
Revvin' up our engines and it sounds real mean"

Rikki Z-06 12-02-2020 7:58pm
Quote:
Originally Posted by Rodnok1 (Post 1828564)
Attention Rikki.. We have found your engine
413 :fastguy:

Picking up tomorrow. :cert:

Rikki Z-06 12-02-2020 7:59pm
Quote:
Originally Posted by Rodnok1 (Post 1828564)
Attention Rikki.. We have found your engine
:funnier::funnier::funnier::funnier:

One piece at a time. :yesnod:

RMVette 12-03-2020 7:16am
"Ran when pulled".... :leaving:

Mike Mercury 12-03-2020 8:55am
Quote:
Originally Posted by Rikki Z-06 (Post 1828611)
:fastguy:

Picking up tomorrow. :cert:
Quote:
Originally Posted by Rikki Z-06 (Post 1828612)
:funnier::funnier::funnier::funnier:

One piece at a time. :yesnod:
:rofl: :funnier: :rofl:

Iron Chef 12-03-2020 10:02am
Chrysler made 413's for a long time. Valve covers are painted so it's probably one that came in a Polara or a New Yorker. Depending on the year, it may even be a truck motor. Nothing wrong with that..."RB" engines were very stout and could take a pounding.

Now...if you had one with a factory dual quad cross-ram, you'd really have something there.

:cert:

6spdC6 12-03-2020 10:33am
Quote:
Originally Posted by Iron Chef (Post 1828726)
Chrysler made 413's for a long time. Valve covers are painted so it's probably one that came in a Polara or a New Yorker. Depending on the year, it may even be a truck motor. Nothing wrong with that..."RB" engines were very stout and could take a pounding.

Now...if you had one with a factory dual quad cross-ram, you'd really have something there.

:cert:
Years back I worked part time for my buddy that owned a speed shop and had to adjust/balance the carbs on one of those engines (letter series Chrysler) Wow what a pain in the ass. Regular duel 4s or tri power were not near as bad!

Rikki Z-06 12-03-2020 11:35am
Quote:
Originally Posted by Mike Mercury (Post 1828707)
:rofl: :funnier: :rofl:
:funnier::funnier::funnier:

Mike Mercury 12-03-2020 12:24pm
Quote:
Originally Posted by Iron Chef (Post 1828726)
Now...if you had one with a factory dual quad cross-ram, you'd really have something there.

:cert:
was that the one called the "wedge" ?

6spdC6 12-03-2020 12:29pm
Quote:
Originally Posted by Mike Mercury (Post 1828749)
was that the one called the "wedge" ?
Wedge (wedge head type) is what they called the raised block (higher) non Hemi engine. 383 413 426 440

Vandelay Industries 12-03-2020 12:45pm
I haven't kept up...what are boat anchors selling for these days?:island14:

dvarapala 12-03-2020 2:48pm
Quote:
Originally Posted by mrvette (Post 1828535)
Seize that one!!!
I'm guessing it's already seized... :leaving:

Iron Chef 12-03-2020 3:47pm
Quote:
Originally Posted by 6spdC6 (Post 1828730)
Years back I worked part time for my buddy that owned a speed shop and had to adjust/balance the carbs on one of those engines (letter series Chrysler) Wow what a pain in the ass. Regular duel 4s or tri power were not near as bad!
Chrysler put lead plugs in the holes at the base of the carburetors to cover the idle mixture screws (mainly the Carter AFB on the Hemi, Carter AVS on Magnum engines and Holleys on the SixPacks). You'd get a more accurate adjustment by removing the plugs and fiddling with them, but it made it twice as hard to balance the carbs properly. Most people just left them in and messed with the main idle screw.

SQUIRMIN VERMIN 84 12-03-2020 7:02pm
Exposed intake manifold bores, out in weather.

Cast iron water storage tank...

Rikki Z-06 12-03-2020 7:15pm
1 Attachment(s)
Quote:
Originally Posted by bill_daniels (Post 1828559)
No chromed valve covers. Would not buy.
:island14:

.Attachment 49669


All times are GMT -5. The time now is 8:09am.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn