The Vette Barn - If you build it, they will come... (Lotsa Pics!)

Page 1 of 2

Show 100 post(s) from this thread on one page

The Vette Barn (https://www.thevettebarn.com/forums/index.php)

- C4 Open Discussion (https://www.thevettebarn.com/forums/forumdisplay.php?f=16)

- - If you build it, they will come... (Lotsa Pics!) (https://www.thevettebarn.com/forums/showthread.php?t=10074)

socalman

03-12-2011 12:04pm

If you build it, they will come... (Lotsa Pics!)

Sweet 90

03-12-2011 12:08pm

That's some nice work Dan. :cheers:Are you the contractor for this?

wwomanC6

03-12-2011 12:18pm

Awesome! Looking good so far! :thumbs:

:popcorns::squirrel:

mike100

03-12-2011 12:26pm

A standalone Fiat dealership? not with Chrysler or anything else to prop it up?

socalman

03-12-2011 12:40pm

Quote:

Originally Posted by Sweet 90 (Post 189319)

That's some nice work Dan. :cheers:Are you the contractor for this?

Yes, we are the General. We sub out all the work and my job is to make sure they build it to the plans, fight with the City Inspectors etc.

Quote:

Originally Posted by wwomanC6 (Post 189322)

Awesome! Looking good so far! :thumbs:

:popcorns::squirrel:

Thanks

Quote:

Originally Posted by mike100 (Post 189324)

A standalone Fiat dealership? not with Chrysler or anything else to prop it up?

Yep. There's 5 being built simultaneously in SoCal that I know of and all are Stand Alones. Chryler VIPs visited the site last week, so I think Chrylser will run things in the US.

I've got 3 Service Bays with inground lift(for now) and a Parts building as well

Service Bays (Waiting for the UG Cassettes to get here Tuesday)

http://i636.photobucket.com/albums/u...labRemoved.jpg

Parts (temporarily in the Service Drive)- plans to build behind for 8 lifts and permanent Parts are being drawn up now.

http://i636.photobucket.com/albums/u...tsSlabPrep.jpg
http://i636.photobucket.com/albums/u.../PartsSlab.jpg
http://i636.photobucket.com/albums/u...sSheeted-1.jpg
http://i636.photobucket.com/albums/u...hComplete1.jpg

PLRX	03-12-2011 1:38pm

Dan, Looking great in there. That Fiat logo sucks, I wonder if Fiat knows that.

C4fan

03-12-2011 4:21pm

Looks like you take as much pride in your job as you do in your car. :thumbs:

SQUIRMIN VERMIN 84

03-12-2011 4:26pm

Quote:

Originally Posted by C4fan (Post 189473)

Looks like you take as much pride in your job as you do in your car. :thumbs:

Very impressive! Nice to see another dimension to members! :cheers:

joesgulfstream

03-12-2011 4:29pm

Are the clouds built to Cal. seismic specs or are they out of the zone that requires seismic specs ?

PLRX	03-12-2011 4:30pm

Kimmer

03-12-2011 4:39pm

:thumbsup:

SQUIRMIN VERMIN 84

03-12-2011 4:48pm

Dan's the Man! :cheers:

C4fan

03-12-2011 4:55pm

Quote:

Originally Posted by PLRX (Post 189489)

I remember when you posted this up before, very nice setup. I would love to have a lift.

Sweet 90

03-12-2011 4:57pm

Dan, if you ever move here (maybe on the lam or something):rofl: you can be my neighbour:D

socalman

03-12-2011 6:24pm

Quote:

Originally Posted by joesgulfstream (Post 189486)

Are the clouds built to Cal. seismic specs or are they out of the zone that requires seismic specs ?

Always. The architect takes the 'concept' from the manufacturer and applies it fitting the existing building (95% of the dealers I've done were remodels), then it goes to the Structural Engineer who draws up all the details to code. Plans are submitted to the City and their Engineers go over all the Structural details, mark up corrections if any, or issue the permit. The inspectors have to inspect the work as well. A Deputy Inspector (private party, but licensed) is required for all Metal Welding, Concrete anchoring/rebar and epoxy work) which means they have to watch it as it happens (unlike the City Inspector who looks at everything when it's done, but before it's covered ie. drywall etc.)

This particular cloud was built with 20 gauge metal studs on an existing web truss system (wood) 16" on center, then angled braces every 48" both directions (as typical, using Simpson metal connectors) and then more metal clips (A34s) on each stud to the truss.

I think the whole roof will come down before this breaks loose (as usual).

Quote:

Originally Posted by PLRX (Post 189489)

Thanks Dan

No problem, anytime I can help.

Quote:

Originally Posted by Sweet 90 (Post 189529)

Dan, if you ever move here (maybe on the lam or something):rofl: you can be my neighbour:D

Well Jim, if I ever go on the lamb, it will probably be a tropical island. If you ever go on the lamb, you can join me and we can remodel our huts together :cheers:

C4Fanatic

03-12-2011 8:59pm

Quote:

Originally Posted by mike100 (Post 189324)

A standalone Fiat dealership? not with Chrysler or anything else to prop it up?

There's already one in Salt Lake City, drive by it nearly every day.

Frizlefrak

03-15-2011 9:16am

Quote:

Originally Posted by socalman (Post 189633)

Well Jim, if I ever go on the lamb, it will probably be a tropical island. If you ever go on the lamb, you can join me and we can remodel our huts together :cheers:

That's already planned out.....in a tiny town in Mexico.... :yesnod:

Very cool post Dan.....a different kind of "build" thread. :cheers:

socalman

03-19-2011 11:38am

Quote:

Originally Posted by Frizlefrak (Post 192983)

That's already planned out.....in a tiny town in Mexico.... :yesnod:

Very cool post Dan.....a different kind of "build" thread. :cheers:

We also build storage buildings, but they're very boring. I like the tranformation of a Dealership.

Here's some updated pictures

EXTERIOR IS COMPLETE (Except the lack of signage and the temporary banner)

http://i636.photobucket.com/albums/u...10319-0927.jpg

http://i636.photobucket.com/albums/u...10319-0927.jpg

THESE ARE 1/4" THICK CEMENT PANELS. THEY ATTACH TO A METAL Z BAR USING RIVETS. THEY COME IN VARIOUS COLORS AND SHAPES. FIRST TIME I'VE DONE THESE.

http://i636.photobucket.com/albums/u...10319-0928.jpg

TILE FLOOR MATCHING THE LIGHT CLOUD ABOVE (getting ready to grout, so it's dirty)

http://i636.photobucket.com/albums/u...10319-0925.jpg

THE GOOD STUFF! LIFTS ARE IN, AWAITING PEA GRAVEL BACKFILL AND THEN CONCRETE PERIMETER FOOTING.

http://i636.photobucket.com/albums/u...10319-0928.jpg

http://i636.photobucket.com/albums/u...10319-0928.jpg

PLRX	03-19-2011 12:57pm

Dan, take the Vette there and take a picture of it inside the Fiat dealer. Pop that cherry man :hurray:

socalman

05-03-2011 11:50am

Finished 4/1/11- Showroom Interior/Exterior

http://i636.photobucket.com/albums/u...nComplete2.jpg

http://i636.photobucket.com/albums/u...lsComplete.jpg

http://i636.photobucket.com/albums/u...mFurniture.jpg

http://i636.photobucket.com/albums/u...erComplete.jpg

http://i636.photobucket.com/albums/u...feComplete.jpg

http://i636.photobucket.com/albums/u...llComplete.jpg

http://i636.photobucket.com/albums/u...rFurniture.jpg

http://i636.photobucket.com/albums/u...Furniture1.jpg

All times are GMT -5. The time now is 9:05pm.

Page 1 of 2

Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn