The Vette Barn

The Vette Barn (https://www.thevettebarn.com/forums/index.php)
-   C6 Open Discussion (https://www.thevettebarn.com/forums/forumdisplay.php?f=13)
-   -   Mother$%^#$! Is this true? (https://www.thevettebarn.com/forums/showthread.php?t=56988)

Loco Vette 09-18-2013 1:59pm

Mother$%^#$! Is this true?
 
Quote:

Originally Posted by Vette Action Center
Sorry, on the C6 it no longer can be read with a button combination. You will need a hand held reader or an OBDII program for your laptop/computer.

Same with the tire pressure sensors training, not a magnet thing anymore.

We really can't pull codes from the DIC anymore?

Y2Kvert4me 09-18-2013 2:38pm

Yeah, you need a scanner to pull C6 codes.

Loco Vette 09-18-2013 2:48pm

:issues:

VetteBoy1979 09-20-2013 10:53am

Lame. :(

At least you can go to AutoZone, etc, and they should pull the codes for FREE. My mechanic actually charged me $100 one time before I found out about the FREE option. Dick!

RED-85-Z51 09-20-2013 11:09am

Quote:

Originally Posted by VetteBoy1979 (Post 1039389)
Lame. :(

At least you can go to AutoZone, etc, and they should pull the codes for FREE. My mechanic actually charged me $100 one time before I found out about the FREE option. Dick!

Autozone is a joke. Their scanner said my Upstream driver side 02 was gone...i got under and found my downstream pass side was covered in oil from a bad rear trany seal. I cleaned it, and it never did it again...no codes, no problems. Soem deal with another vehicle..they told me I had a bad IAC valve when my problem was a bad TPS....


All times are GMT -5. The time now is 7:13pm.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn