The Vette Barn

The Vette Barn (https://www.thevettebarn.com/forums/index.php)
-   C1 & C2 Corvette Open Discussion (https://www.thevettebarn.com/forums/forumdisplay.php?f=35)
-   -   62 4-speed shifter question (https://www.thevettebarn.com/forums/showthread.php?t=67821)

aloehr 06-19-2014 10:37am

62 4-speed shifter question
 
1 Attachment(s)
Hoping someone can help me with this.. Pulled the clutch on my 62 327 4-speed car. On the original shifter there is a 1/4" diameter pin that holds the stick shift to the cross shaft.. That pin was half way out when I removed the shifter. It pushed back to the center easily.. What is supposed to hold it in place?
I added a picture to this post. I hope you can see it. You can see the end of the pin at the lower right . Thanks
Alan

Kerrmudgeon 06-26-2014 06:30am

Sorry, but the first thing I change out is the shifter to a Hurst so I never have to worry about it again. And that was a long time ago on my 62.
Look in your shop manual or ask on the Corvette Forum C1+2 forum. They're quick with a response and good guys as well.
This link should work....:thumbs:
C1 & C2 Corvettes, 1953 - 1967 - Corvette Forum


All times are GMT -5. The time now is 02:31pm.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2009 - 2019 The Vette Barn