radio antenna
 

Have an 89 conv and was troubleshooting the radio antenna not working. Found the relay and connector was corroded. I can find a replacement relay but need the two connectors that go to it. Anybody know where I can find them or has anybody found a different relay and connector that will work. Thanks

try gary's corvettes he is on ebay. also justcorvettes.com.

how about eckler's corvette?

More than likely a Packard Delphi connector.

http://www.mouser.com/delphi-connection-systems/

or

Connection Systems

I got the connector and replaced the relay. Got a new antenna and replaced it (WTF!) but the antenna will not go up. I have good power to the relay from the radio but still no work. I got another antenna but still same problem. Is there any way to check the antenna without having to install it? HELP!!

No CD playing right? The radio is on. I know, stupid question but sometimes the obvious gets overlooked.

Radio works but antenna no moves

Ensure all wires are properly connected. You'd have to back track from the antenna back to the relays. I dont know on the 89, but on the 95-96 it is behind the passengers seat.

I just added a switch to leave mine down at all times.

I checked all the wires to and from the relay. I also got 2 new antennas and they still don't. work. Any way I can check the antenna with ouy plugging it into the car?

Test the motor, if you have power to the antenna's motor then, you may need a new motor. If there is no power to it, keep back tracking. This is a tedious project. I've been there, done that more than few times.

I tried 2 brand new motors and neither of them worked. They are AC Delco units. Has anybody had problems with them?