The Vette Barn

The Vette Barn (https://www.thevettebarn.com/forums/index.php)
-   C5 Open Discussion (https://www.thevettebarn.com/forums/forumdisplay.php?f=15)
-   -   Mod's for the 99'. What do you think? (https://www.thevettebarn.com/forums/showthread.php?t=83868)

darnold 06-10-2015 2:39pm

Mod's for the 99'. What do you think?
 
Since I just got my first Corvette seven weeks ago I have been planning and refining what mods I would like to initially do to it regarding H.P. and Handling and LOOKS. I've refined the list to the following and wanted to get people on the forums' thoughts and further ideas?

H. P.
- I'm putting my twin tube CIA on this evening and plan to buy a ported MAF next week, and possibly a Vararam Power Bridge the two weeks from now to increase some H.P. I'm anticipating about 20 H.P. combined based upon the literature reviews that I've been able to pull up from multiple dyno reports and C5 owners.

Should I add a power bridge to this equation considering that the stock TB has been independently checked at flowing around 570 CFM but the stock intake system (box, filter, bridge/couplings, MAF) only flowed 370ish CFM?

Would a Borla exhaust or Magnaflow mufflers be a good upgrade over the stock mufflers to add for a little more H.P. and better sound once I complete the intake side of things? BTW, I do plan on putting an LS6 Intake on later this year if I can find one. LOL

HANDLING
- My C6 Z06 Shocks shipped today to go on the car and I'm thinking about putting on a Steinjager Z06 sway bar kit with their nice metal end links.

Will this setup work well using the springs from my base suspension (FE1???), or do I have to upgrade to the Z51 spring set?

LOOKS
- I've ordered my side fender mesh screens and they should be here by next week. I would like to put some new halogens in for a crisper "white light" and was hoping for some suggestions that I could run to the automotive shop to pick up and put in this weekend. Any ideas/experiences?

Thanks in advance for everyone's thoughts and ideas. -Dave

Sneaks 06-10-2015 5:50pm

Welcome aboard, and congrats on your first Vette. As for mods, there is no limit to what you can do to these cars. A lot of people when they buy their first one go overboard with and end up with "catalog" cars. No real individuality, just a bunch of stick on crap.
That said, seems like you're heading in a good direction.
As for intake, a vararam or vortex system will let it breathe better. Either one brings in much cooler outside air. Your twin cone breathes a little better than stock, but still brings in air thats warm from under hood.
Cant go wrong with Borla or Magnaflow. I personallly have Borla Stingers and they're deep without being obnoxiously loud. Search youtube for sound clips to see which ones you like best. Adding a good set of headers will let your engine breathe and make the sound much better also. Longtubes are best, but don't let anyone tell you that shorty headers aren't worth it. They get the gases out, sound great, and need no modification to install. Again, your choice.
Suspension wise, the best set up is a complete coilover conversion, but thats high dollar stuff. Changing to a better shock, bigger z06 sway bar with metal end links will definitely help. Yes, they will work with the stock lead spring. The best thing you can do for the handling of the car is to change from run flat tires to a convention performance tire. The choices are almost limitless. You'll think it's a completely different car.
If it's white light your looking for HIDs with 6000K bulbs are the whitest you'll find. But any halogen in the 6000K light range will be much whiter than the stock halogens.
Again, welcome and enjoy your new baby!
Sneaks

darnold 06-12-2015 12:53pm

Quote:

Originally Posted by Sneaks (Post 1366042)
Welcome aboard, and congrats on your first Vette. As for mods, there is no limit to what you can do to these cars. A lot of people when they buy their first one go overboard with and end up with "catalog" cars. No real individuality, just a bunch of stick on crap.
That said, seems like you're heading in a good direction.
As for intake, a vararam or vortex system will let it breathe better. Either one brings in much cooler outside air. Your twin cone breathes a little better than stock, but still brings in air thats warm from under hood.
Cant go wrong with Borla or Magnaflow. I personallly have Borla Stingers and they're deep without being obnoxiously loud. Search youtube for sound clips to see which ones you like best. Adding a good set of headers will let your engine breathe and make the sound much better also. Longtubes are best, but don't let anyone tell you that shorty headers aren't worth it. They get the gases out, sound great, and need no modification to install. Again, your choice.
Suspension wise, the best set up is a complete coilover conversion, but thats high dollar stuff. Changing to a better shock, bigger z06 sway bar with metal end links will definitely help. Yes, they will work with the stock lead spring. The best thing you can do for the handling of the car is to change from run flat tires to a convention performance tire. The choices are almost limitless. You'll think it's a completely different car.
If it's white light your looking for HIDs with 6000K bulbs are the whitest you'll find. But any halogen in the 6000K light range will be much whiter than the stock halogens.
Again, welcome and enjoy your new baby!
Sneaks

Much obliged. Thank you. I was concerned about using the stiffer shocks and roll bars with the noticeably softer spring rates, but I'm glad that people have been doing it and liked the results. I'm looking to go to Bloomington Gold and do their Auto Cross. It will be tight regarding installation of the suspension upgrades because I can't order the roll bars until next Friday even though the C6 Z06 shocks came today. That would potentially leave me with only having 1-2 days to try to get them installed so I might not get to try the new package out right away. :slap:

I'll check out some 6000k halogen bulbs to replace what I have today as well as checking into some HID's and what it would take to install either.
:barnbabe:

Sneaks 06-13-2015 6:33am

Quote:

Originally Posted by darnold (Post 1366876)
Much obliged. Thank you. I was concerned about using the stiffer shocks and roll bars with the noticeably softer spring rates, but I'm glad that people have been doing it and liked the results. I'm looking to go to Bloomington Gold and do their Auto Cross. It will be tight regarding installation of the suspension upgrades because I can't order the roll bars until next Friday even though the C6 Z06 shocks came today. That would potentially leave me with only having 1-2 days to try to get them installed so I might not get to try the new package out right away. :slap:

I'll check out some 6000k halogen bulbs to replace what I have today as well as checking into some HID's and what it would take to install either.
:barnbabe:

Installing HID's is as simple as changing a bulb. They are a plug amd play type deal. :seasix:

darnold 06-20-2015 4:22pm

Thanks Sneaks. I'm thinking of putting these in the car:
http://www.ebay.ca/itm/55W-HID-KIT-A...-/300774350478

What do you think???

Sneaks 06-21-2015 10:03am

Yup, good choice. 55W bulbs is what you want to go with. They put out a chit-ton of light.

darnold 06-23-2015 12:26am

Ok. I'll look into getting these. I adjusted the low beams and I can see a ton better but it's still not as bright, with that tint of blue that I would like. LOL
I've done a number of things on my list and need to post some pic's on this thread soon.

Sneaks 06-23-2015 1:21pm

Yeah get pics up. :seasix:

darnold 07-24-2015 1:09am

Put a pic of my Corvette for my sig. Other pic's will make it up before the summer is out. Thanks everyone for your camaraderie.

Sneaks 07-26-2015 6:10am

Nice looking ride.


All times are GMT -5. The time now is 4:05am.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn