Best place to send Gauge Panel for repair?
 

I finally got power to the Fuel Pump and all the parts to replace the pump, screen and filter. Providing all goes well, the next project is to get the Gauge Panel repaired....

Where is the best place to send it?

How long does it typically take to R & R the Fuel Pump, screen and filter along the frame rail?

Thanks,

Steve

Are you talking about the digital display instrument cluster? With all the
speedo, tach and engine functions?

Here's the DIY site and all the directions, I've used it and my displays are radiant!
http://www.corvetteitalia.it/public/...2010211831.pdf

I believe Ecklers has a service for refurbishing dash clusters. Check them out-
about $300..

Yes I am talking about the Gauge Cluster... And thanks again for the instructions, once I get the fuel pump replaced... The next thing is the Gauge Cluster, I think Ill send it to Battee an have him go over it...

How long should it take to R & R a fuel pump, screen and fuel filter along the frame?

Thanks again..

Steve

It took me under a couple hours for the pump. I've done the filter in about 1/2 hr.

I'm anal with OCD. It might take you less, more if you bleed while working...:leaving: