Deck table
 

I've decided to replace the old hand-me-down table on my deck with something smaller, nicer and that fits under the kitchen casement windows better. It will include a fire table with glass wind screen. Here's the design.

This is a repeat I believe. Ya must be bored to thread start twice

Since I'm here in Colorado with Zippy Truck, I went to a local Lowes and bought the lumber for my new table. We can't get redwood lumber back east for these commodity prices. This was about $180, which includes three 12-foot long 2x8's for the top, and a small assortment of 2x4s and 4x4s for the frame and legs.

I borrowed my son's 20v circular saw and cut the lumber to length in the parking lot.

Maybe. I got very busy and put this little project on hold. Since I took the truck on this road trip to Colorado I decided to take advantage of a near-empty bed and a relatively cheap source of redwood lumber.

What do you do when a fifth shows up, and I do not mean JWBlack?!?!?

:confused5::confused5::confused5:

In for this epic thread. :hurray:

It's epic now that Yadkin is back and contributing. Slim pickin's around here lately with lack of content. :)

Have another drink.

https://www.masterofmalt.com/whiskie...sky.jpg?ss=2.0

You’re still a clown

You still mad bru. :D

You can always go back to CFOT. The place you claim to hate but post there daily. :seasix:

How could I be mad on St Patty’s day

Looks like a blackjack table for kids.....Another fine design by YadMo...smh lol

.

You're in rare form today. :Jeff '79:

You’re going to place that gas fireplace under a window?

No code violation there.

designs look like they are off by 1/8"

I prefer Kentucky whiskey myself. :seasix:

It will be, maybe as much as 1/2". The 2x8's I bought were 1/8", maybe 3/16" over 12'. When I cut them in half they didn't fit in Zippy's 6-foot bed. So I had to re-cut....