FS: 1997-2004 slip fit 3" X pipe with 3" stainless works catback
 

This is an older proto type 3" stainless works non catted mid-section. Slip fit over the axles w/o the std 2 bolt flange

$350 + 1/2 shipping.

********THE HEADERS ARE SOLD***************
The one cut on each side you see can be welded or just put on a 3" but joint band clamp.
One muffler needs a crack welded up as well.
The one pipe I had to flatten to clear my Rossler A4 deep sump
tranny pan.

Below are links to albums with pics, just look through the pages to see installed and off the car pics

Corvette photos | Corvette pics - 5/06 97' transmission fix - Powered by PhotoPost

Here is a link to the exhaust pics I just took.
Corvette photos | Corvette pics - 3_inch_x_pipe_and_stainless_works_catback_038 - Powered by PhotoPost
http://forums.corvetteforum.com/phot...atback_027.JPG

http://forums.corvetteforum.com/phot...atback_028.JPG

http://forums.corvetteforum.com/phot...atback_032.JPG
It has a nice deep sound, here is a video running at the track:
http://www.youtube.com/user/ATandNB#p/u/17/oRXIy6_kBaYSteve

^^^^^