Seat issues
Anyone know how to replace the lever that reclines the driver's side seat? Do I need to pull the seat out to do it?
|
Its easier if you do!
Underneath lever is a u clip you pull it out (i use a bent hanger) then handle slides off. Install is in reverse! Mario |
Seat Back Recliner Handle Replacement - Front:
https://www.thevettebarn.com/tom/recliner1.jpg 1) With a suitable blunt ended tool inserted between the cushion and the handle push the handle retaining spring clip down. 2) Pull the handle from the shaft. Installation Procedure: 1) Position the handle retaining spring clip into the lock position. 2) Snap the handle onto the reclining mechanism shaft. :cheers: |
I believe if you slide the seat all the way forward and fold it down you can work on the handle if you can get ti to work enough to fold it forward.
|
We didn't take the seat out. We used a crochet hook.
|
Not a hard job,, I agree with the posts above!
|
Quote:
|
All times are GMT -5. The time now is 9:42am. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn