What cam and heads you runnin?
 

I got tired of seeing my stupid lid question at the top so let's try something new.

What cam and heads are you running in your Vette and seen as how not everyone out there runs a LS1 you better put what motor it's in as well. :cheers:

I personally have a Texas Speed cam 232/234 .595/.598 113LSA in and LS1 with Ported 243 heads from Advanced Induction with PAC springs.

WCCH Stage 3 L92's. 2.20 inch intake and flow 380CFM.

Darton sleeved LS2 block 427CI.

Cam is not for discussion but it would be considered a mid-size cam in an LS1.

I was wondering why some shops won't give out the specs on stuff like cams and heads. Did they at least tell you what it was or do they just say "trust us, you won't be disappointed"? They wouldn't give me much info about my heads when they did them (same shop).

Nothing has ever gone in my car with my knowing exactly what it is and approving it. I have considerable engine building experience myself - although in GP motorcycles - so I can have involved conversations with the boys. Most people would be better served to find someone they trust who has a great reputation and letting them do their thing. VA Speed spent a huge amount of their own time on R&D on my build. I'm hoping they can recover some of their costs. Shawn has made my build one of their standard package offerings (starting at $15k) :o_o:.

That's G14 classified! -- (Rush Hour)
:D

Yellow Z06 that Paul now owns has a G5-X2 (232/240 .595/.608 114LSA) w/ stock heads.

The red vert is stock as GM made it.

The silver Z06 has stock heads/cam as well but with 2002-2004 valve springs, a LS2 timing chain, and an ATI 10% underdrive Superdamper.

1994 LT1, A4
Lloyd Elliot LT1 LE2 Heads
218/224 .544/.544 .111 LSA cam
1.6 Crane RR's, Patriot Gold Springs
LT4 Intake
JBA Headers
2800 Stall Converter

:dance:

Stock for Now. Will be a Mod in the near future! If not a whole new rebuild? :yesnod:

01' vert 414 cid sleeved
#317 LQ9 heads (2.10 in/1.6 ex)
HYDRAULIC ROLLER CAM .613/.647 @ 250/258 with 114+2 LSA

97' coupe 6.0 iron block 417 cid
#243 Cartek stage 4 heads with supposid stage 4 cam of .580ish @ 250 ish with 114 LSA ish :lolsmile:
I have yet to break the short block since 2003 so I can't confirm anything yet!

They both work well.
Let me know if ya want video of at idle :D

Stock heads, Mayhem II cam,
I have Kooks LTs, high flow cats, tuned by Englandgreen , 436RWHP :D

The original 1962 327/300 HP, Comp 280 HR cam, ground on a 112* LS, AFR 195 CC Eliminator heads.

Hey Wes...just poppin' in to say welcome aboard. :cheers:

EnglandGreen Whiplash cam and AFR 235cc heads among other things. This is a 2007 LS2 with 665 rwhp. :auto:

Details here.

Thanks Chef! :cheers:

In my 96 LT4 I use Elliot's Portworks LE2 and a CA SMOG legal cam.

http://i275.photobucket.com/albums/j...T4/CELT496.jpg

http://i275.photobucket.com/albums/j...E2/CELT473.jpg

http://i275.photobucket.com/albums/j...E2/CELT479.jpg

http://i275.photobucket.com/albums/j...E2/CELT480.jpg

http://i275.photobucket.com/albums/j...E2/CELT481.jpg

http://i275.photobucket.com/albums/j...E2/CELT499.jpg

http://i275.photobucket.com/albums/j...2/CELT4100.jpg

http://i275.photobucket.com/albums/j...E2/CELT477.jpg

383 4 bolt
Erson 218/226 .544/.544 .112 LSA cam w/ 1.6 Yella Terra alum rockers
Dart Pro 1- 180cc 64cc alum heads..10.25 to 1 compression
Edelbrock high flow intake
Accel high flow runners
Corvette Plenums- Mega ported plenum
Intake ported and port matched for flow
24 lb Bosch III injectors
Hooker Ceramic headers with air/egr delete
Mick Stevens custom tune
700R4 Stage II trans

Not a Vette only toy I have though


Gen 1 sbc

385 ci
11.5-1
300/232 cfm Darts, 230cc
Isky solid roller, 260/268@/050. 108 LSA .640 lift
Jesel 1.6
ported team G, 750 Holley DP

Like that rpm just a little bit.


Not for everyone....